---------------------------------------------------------------------
        - Sun Proprietary/Confidential: Internal Use Only -
---------------------------------------------------------------------  
                        FIELD INFORMATION NOTICE
                  (For Authorized Distribution by SunService)

FIN #: I0456-1

Create Date: Nov/25/98

Keywords: 

Ultra Enterprise 450 System Board Clock Mode Jumper J2701

Top FIN/FCO Report: No

Products Reference: E450 UltraSPARC II Module Support

Product Category: Server / System Board

Product Affected: 

Mkt_ID   Platform   Model   Description           Serial Number
------   --------   ------  --------------------  -------------

Systems Affected
----------------

  -       A25         -     Ultra Enterprise 450            -


X-Options Affected
------------------

X2244A    -           -     OPT 400MHZ CPU W/4MB FOR E450   -

Parts Affected: 

Part Number   Description   Model
-----------   -----------   --------------------
501-5270-XX   System Board  Ultra Enterprise 450

References: 

MANUAL: 805-6697-10  Ultra Enterprise 450 CPU Module Guide (pending ecr14041)
MANUAL: 805-0429-10  Ultra Enterprise 450 Server Owner's Guide (Jul 1997)
DOC: 805-2320-11  Ultra Enterprise 450 Product Notes (Sep 1997)
DOC: 805-2320-12  Ultra Enterprise 450 Product Notes (Dec 1997)
DOC: 805-2320-13  Ultra Enterprise 450 Product Notes (Mar 1998)
DOC: 805-2320-14  Ultra Enterprise 450 Product Notes (Jun 1998)
DOC: 805-6577-10  Ultra Enterprise 450 Product Notes (pending ecr14041)

Issue Description: 

The Ultra Enterprise 450 Product Notes (805-2320-XX) provides incorrect 
information on how to set the clock jumper for the 400MHz UltraSPARC II.

The silkscreen near J2701 on System Board 501-5270-0X provides incorrect 
information on how to set the clock jumper for the 400MHz UltraSPARC II.

 The silkscreen near J2701 reads:

	ULTRASPARC 1/2 CLK SELECT
	ULTRA-1 CPU 2-3
	ULTRA-2 CPU 1-2

Implementation: 

---
    	|   |  	MANDATORY (Fully Pro-Active)
  	 ---    
  	 
  
         ---
    	|   | 	CONTROLLED PRO-ACTIVE (per Sun Geo Plan) 
  	 --- 
  	 
  	   			
         ---
    	| x | 	REACTIVE (As Required)
  	 ---

Corrective Action: 

When UltraSPARC II 400MHz modules are installed on Ultra Enterprise
450 System Board 501-5270-XX, a jumper is required at J2701 Pins 2-3. 
With a 400MHZ Module and the jumper on Pins 2-3, the clock is set to 
divide-by-four mode.

When UltraSPARC II 250Mhz and 300MHz modules are factory installed
in Ultra Enterprise 450 System Board 501-5270-XX, a jumper is installed 
at J2701 Pins 1-2.  The jumper is not required because there is no 
connection to Pin-1.  With the jumper installed or removed, the clock
is set to divide-by-three mode.

Comments: 

The section "About the Clock Mode Select Jumper" in the Ultra Enterprise
450 Server Owner's Guide is superseded by the section "Main Logic Board
Jumpers" in the Ultra Enterprise 450 Product Notes.

The Ultra Enterprise 450 Product Notes 805-2320-xx is superseded by the
Ultra Enterprise 450 Product Notes 805-6577-10. Instructions on how to
set the System Board clock mode jumper for 250MHz, 300MHz, and 400MHz 
UltraSPARC II modules are included.

The Ultra Enterprise 450 CPU Module Guide also provides instructions on
how to set the System Board clock mode jumper for 250MHz, 300MHz, and
400MHz UltraSPARC II modules.

Ultra Enterprise 450 System Board 501-2996 does not have a 3-pin header
installed at J2701. System Board 501-2996 is not compatible with the 
400MHz UltraSPARC II Module. A board upgrade is available through sales.

Ultra Enterprise 450 systems were shipped with Ultra 450 Workstation
System Board 501-5028 under Deviation WO_14046.  This board has not
been qualified for use with the 400MHz UltraSPARC II Module. A board 
upgrade is available through sales.

The 167MHz and 200MHz UltraSPARC I is not supported in Ultra Enterprise
450 Workgroup Servers or Ultra 450 Workstations.

The 400MHz UltraSPARC II is not supported in Ultra 450 Workstations.

--------------------------------------------------------------------------

Implementation Footnote: 

________________________

i)   In case of MANDATORY FINs, Enterprise Services will attempt to contact   
     all affected customers to recommend implementation of the FIN. 
        

ii)  For CONTROLLED PROACTIVE FINs, Enterprise Services mission critical sup-   
     port teams will recommend implementation of the FIN (to their respective 
     accounts), at the convenience of the customer. 


iii) For REACTIVE FINs, Enterprise Services will implement the FIN as the need  
     arises.

-----------------------------------------------------------------------
 
All released FINs and FCOs can be accessed using your favorite network 
browser as follows:
 
SunWeb Access: 
______________
 
* Access the top level URL of http://cte.corp/FIN_FCO/

* From there, select the appropriate link to query or browse the FIN and
  FCO Homepage collections.
 
SunSolve Online Access:
_______________________
 
* Access the SunSolve Online URL at http://sunsolve.Corp/

* From there, select the appropriate link to browse the FIN or FCO index.

Supporting Documents:
____________________
 
Supporting documents for FIN/FCOs can be found on Edist.  Edist can be 
accessed internally at the following URL: http://edist.corp/.
  
* From there, follow the hyperlink path of "SunService Documentation" and 
  click on "FIN & FCO attachments", then choose the appropriate folder,  
  FIN or FCO.  This will display supporting directories/files for FINs or
  FCOs.
   
Internet Access:
_______________
 
* Access the top level URL of https://infoserver.Sun.COM
 
--------------------------------------------------------------------------
    
General:
________

Send questions or comments to finfco-manager@cte.Corp

---------------------------------------------------------------------------