---------------------------------------------------------------------
- Sun Proprietary/Confidential: Internal Use Only -
---------------------------------------------------------------------  
                            FIELD INFORMATION NOTICE
                  (For Authorized Distribution by SunService)

FIN #: I0743-1

Create Date: Jan/16/02

Keywords: 

Rack-mounted Enterprise 220R, 420R and Sun Fire 280R systems may bind with adjacent systems if improperly installed

SunAlert: No

Top FIN/FCO Report: No

Products Reference: Enterprise 220R, 420R & Sun Fire 280R Rack

Product Category: Server / Service

Product Affected: 

Systems Affected
----------------
Mkt_ID   Platform      Model      Description               Serial Number
------   --------      -----      -----------               -------------
  -        A34          ALL       Enterprise 220R Server         -
  -        A33          ALL       Enterprise 420R Server         -  
  -        A35          ALL       Sun Fire 280R                  - 


X-Options Affected
------------------
Mkt_ID        Platform   Model   Description                Serial Number
------        --------   -----   -----------                -------------
  -              -         -          -                           -

Parts Affected: 

Part Number        Description                Model
-----------        -----------                -----
     -                  -                       -

References: 

MANUAL: 806-4805-10 - Sun Fire 280R Server Setup and Rackmounting Guide
        806-1086-10 - Sun Enterprise 420R Server Setup and Rackmounting Guide
        806-1087-10 - Sun Enterprise 220R Server Setup and Rackmounting Guide
        805-4748-10 - Rackmount Placement Procedure

Issue Description: 

When multiple Enterprise 220R, 420R and Sun Fire 280R systems are
mounted into an EIA-310 compliant rack according to the installation
manuals, the units may touch or bind.  This might make it difficult to
slide the systems out for servicing.  The units may rub together and
produce noise.  Customers may complain about this condition, although
the issue does not impact system functionality or operations.

These servers are designed to be installed into a 72-inch (184-cm) tall
Sun expansion cabinet or any other EIA-310 compliant rack.  The
system's two slide rails are attached to holes found in the cabinet's
vertical mounting rails.  It has been found that when multiple systems
are rack-mounted using spacing as found on pages 32-33 of the
"Rackmount Placement Procedure" (P/N 805-4748-10), adjacent units may
touch.  This produces a serviceability issue where it becomes difficult
to slide the systems in and out of the rack.

The root cause of this binding issue is that the systems were designed
2mm too tall and when systems are rack mounted one on top of another,
there is a tendency for two adjacent chassis's to make contact with
each other causing the units to not slide easily on the rails.
 
Please follow the recommendations given in the Corrective Action
section.  The fix is to simply allow extra space between systems when
mounting them into a 72-inch rack.  In addition, it is recommended that
the plastic front panel not be used as a handle when sliding systems
out as it can easily break.

Implementation: 

---
        |   |   MANDATORY (Fully Pro-Active)
         ---    
         
  
         ---
        |   |   CONTROLLED PRO-ACTIVE (per Sun Geo Plan) 
         --- 
         
                                
         ---
        | X |   REACTIVE (As Required)
         ---

Corrective Action: 

The following recommendation is provided as a guideline for authorized
Enterprise Services Field Representatives who may encounter the above 
mentioned problem. 
 
1. Please refer to the appropriate manual below for detailed instructions 
   when mounting one of the affected systems into an EIA-310 compliant rack.

   Sun Fire 280R Server Setup and Rackmounting Guide, 806-4805-10 
   Sun Enterprise 420R Server Setup and Rackmounting Guide, 806-1086-10
   Sun Enterprise 220R Server Setup and Rackmounting Guide, 806-1087-10

2. If installing multiple systems into the same rack, offset the slide
   rails by one extra hole on the vertical mounting rails to allow for 
   proper clearance between two adjacent systems.  This can be done by 
   either counting the rack rail holes or using the Rack Buddy (shipped 
   with the Accessory Kit) to make sure that each slide assembly is
   installed at the same height in the rack.

3. Avoid using the system's plastic front panel as a handle when sliding
   a system out of the rack.

Comments: 

None  

============================================================================

Implementation Footnote: 

i)   In case of MANDATORY FINs, Enterprise Services will attempt to    
     contact all affected customers to recommend implementation of 
     the FIN. 
   
ii)  For CONTROLLED PROACTIVE FINs, Enterprise Services mission
critical    
     support teams will recommend implementation of the FIN  (to their  
     respective accounts), at the convenience of the customer. 

iii) For REACTIVE FINs, Enterprise Services will implement the FIN as
the   
     need arises.
--------------------------------------------------------------------------
All released FINs and FCOs can be accessed using your favorite network 
browser as follows:
 
SunWeb Access:
-------------- 
* Access the top level URL of http://sdpsweb.ebay/FIN_FCO/

* From there, select the appropriate link to query or browse the FIN and
  FCO Homepage collections.
 
SunSolve Online Access:
-----------------------
* Access the SunSolve Online URL at http://sunsolve.Corp/

* From there, select the appropriate link to browse the FIN or FCO
index.

Supporting Documents:
---------------------
* Supporting documents for FIN/FCOs can be found on Edist.  Edist can be 
  accessed internally at the following URL: http://edist.corp/.
  
* From there, follow the hyperlink path of "Enterprise Services
Documenta- 
  tion" and click on "FIN & FCO attachments", then choose the
appropriate   
  folder, FIN or FCO.  This will display supporting directories/files
for 
  FINs or FCOs.
   
Internet Access:
----------------
* Access the top level URL of https://infoserver.Sun.COM
--------------------------------------------------------------------------
General:
--------
* Send questions or comments to finfco-manager@Sun.COM
--------------------------------------------------------------------------