Expert3D Lite
24-Bit Color Frame Buffer
Workstations: |
Ultra 60, 80
Sun Blade 100, 1000, 2000 |
Servers: |
Sun Fire V880 |
Option 3684
375-0116 |
375-3052 |
3.3/5V 64Bit 66MHz 6760B FAB SB100 only |
3.3/5V 64Bit 66MHz 6760C FAB |
UNIX ID: /dev/fbs/ifb0
Compatibility Matrix
|
Ultra 60 |
Ultra 80 |
Sun Blade 100 |
Sun Blade 1000 |
Sun Fire V880 |
375-0116-01 |
Tested |
Tested |
Tested |
Tested |
Not Tested |
375-0116-02 |
Not Tested |
Not Tested |
Tested |
Not Tested |
Not Tested |
375-0116-03 |
Not Tested |
Not Tested |
Tested |
Not Tested |
Not Tested |
375-3052-01 |
Not Tested |
Not Tested |
Not Tested |
Tested |
Not Tested |
375-3052-02 |
Tested |
Tested |
Tested |
Tested |
Requires I/O >=501-5142-12 |
Expert3D Lite Patches
Notes
- X3684A is not supported in the Sun Fire V880 shipped with 750MHz USIII.
- On Ultra 80, Expert3D Lite will not fit into PCI 33MHz Slot 4.
- On Sun Blade 1000/2000, if two Expert3D or Expert3D Lite boards are
installed, patch
>=108576-08
is required.
- On a Sun Blade 1000, do not install in PCI Slot 1 (66MHz).
Install only in Slot 2, 3, or 4 (33MHz).
On other systems, the board is supported in either 33MHz or 66MHz slots.
- If installed in a 33MHz slot, the board will run at 33MHz.
References:
- fbconfig and SUNWifb_config manual pages
-
Expert3D Lite Graphics Card Installation Guide, 806-5932.
|