TurboZX
24-Bit Color Frame Buffer
Workstations: |
SPARCstation 10, 10SX, 20 |
Option 1096
501-2503 |
501-2711 |
501-2502 |
2 Board Set w/o 340-2349 |
Upper Board |
Lower Board |
501-2503 Rear View
|
|
501-2503 Front View without Backpanel
|
|
501-2503 Front View with Backpanel
|
|
501-2503 with Backpanel and Upper Backpanel 340-2349
|
|
SS20 Cooling
Systems manufactured prior to May 1995 require Left Vent 330-1661-02
and Right Vent 540-2548-02.
|
Side View 330-1661-02 and 540-2548-02
|
|
Side View 330-1661-01 and 540-2548-01
|
TurboZX Upper Board
501-2711
Bottom Side
|
|
UNIX ID: /dev/leo0
TurboZX Lower Board
501-2502
Bottom Side
|
|
Notes
- Solaris 2.3 requires Patch 101284-12.
- Solaris 2.4 requires Patch 101921.
- Solaris 2.4 with hyperSPARC requires Patch 101945.
- The final software release is Solaris 2.6.
- TurboZX was announced in May 1995 and discontinued in Nov 1995.
- TurboZX uses the /opt/SUNWleo device driver.
- Standoff 240-2716 and Screw 240-2102 fasten the boards together.
- The SS10 and SS20 requires two 501-2840 Fan Cards.
Screen Resolution
- The variable monitor_type is defined in /etc/init.d/leoconfig.
- Make temporary changes to the screen resolution with the following command:
/etc/opt/SUNWleo/bin/leoconfig -M monitor_type
- Make permanent changes to the screen resolution by removing the comment
symbol # from the desired setting in /etc/init.
References
-
TurboZX Installation Manual, 801-7829.
TurboZX Fan Card
501-2840
Flex Cable 530-2165 |
|
Notes
- The SS10 and SS20 require two 501-2840 Fan Cards.
- Flex Cable 530-2165 provides additional power to the TurboZX.
References
-
TurboZX Installation Manual, 801-7829.
|