Install only one TRI/S. Do NOT install any board in the second slot.
Install SCI and UDWIS/S on separate SBus channels.
SBus I/O Board 501-4349 Notes
Install FC100/S in Slot 0 and DWIS/S in Slot 1.
Install GBE/S 1.x in Slot 0. There are no slot restrictions for GBE/S 2.0.
Install SunFastEthernet 2.x in Slot 0 and DWIS/S in Slot 1.
Install SunSwift in Slot 0 and DWIS/S in Slot 1.
SSP software controls whether the system will boot when SBus boards
are installed in Slot 1 of SBus I/O board 501-4349. Problems may occur if
SBus slot restrictions are not followed.
501-4349 Slot 1
SSP 3.0 <=104853-04
SSP 3.0 >=104853-05
SSP 3.1 <=105684-06
SSP 3.1 >=105684-07
SSP 3.1.1
SSP 3.2
SunSwift FastEthernet GBE/S 1.x FC100/S
will not boot will not boot will not boot
will boot
will boot will boot will boot will boot
will not boot will not boot will not boot
will boot
will boot will boot will boot will boot
will boot will boot will boot will boot
will boot will boot will boot will boot
SBus I/O Board 501-4478 Notes
SSP software controls whether the system will boot when SBus boards
are installed in Slot 1 of SBus I/O board 501-4478.
There are no slot restrictions for FC100/S, GBE/S, SunFastEthernet,
or SunSwift when SBus I/O board 501-4478 is used with new versions
of SSP software.*
501-4349 Slot 1
SSP 3.0 <=104853-04
SSP 3.0* >=104853-05
SSP 3.1 <=105684-06
SSP 3.1* >=105684-07
SSP 3.1.1*
SSP 3.2*
SunSwift FastEthernet GBE/S 1.x FC100/S
will not boot will not boot will not boot
will boot
will boot will boot will boot will boot
will not boot will not boot will not boot
will boot