Sun Fire 3800 / 4800 / 4810 / 6800
Sun Fire 12K / Sun Fire 15K
Sun Fire E20K / Sun Fire E25K
Sun Fire E2900 / E4900 / E6900
Sun Fire V1280 / Netra 1280/1290
Options 7051 / 7053 / 7056
F501-5030 |
501-5401 |
F501-6109 |
540-5086 |
512MB DIMM 501-5030 512MB DIMM 501-7385
3.3V ECC / 7ns SDRAM Option 7051 |
256MB DIMM 3.3V ECC / 7ns SDRAM
Option 7053 |
1GB DIMM 501-6109 1GB DIMM 501-7386
3.3V ECC / 7ns SDRAM
Option 7056
Not supported at 750MHz |
1GB DIMM 501-6109 1GB DIMM 501-7386
3.3V ECC / 7ns SDRAM |
Options 7051A-Z / 7056A-Z / 7058A-Z
501-7385 |
501-7386 |
501-6242 |
512MB DIMM 3.3V ECC / 7ns SDRAM
Option 7051A-Z L |
1GB DIMM 3.3V ECC / 7ns SDRAM
Option 7056A-Z L
not supported at 750MHz |
2GB DIMM 2GB FRU 540-6489 3.3V ECC / 7ns SDRAM
Option 7058A-Z L
not supported on:
SF 3800
Netra 1280
See 2GB DIMM Notes below
|
CPU1 and CPU0 Memory
SOCKET |
CPU |
BANK |
DIMM |
J14600 |
P1 |
B0 |
D3 |
J14601 |
P1 |
B1 |
D3 |
J14500 |
P1 |
B0 |
D2 |
J14501 |
P1 |
B1 |
D2 |
J14400 |
P1 |
B0 |
D1 |
J14401 |
P1 |
B1 |
D1 |
J14300 |
P1 |
B0 |
D0 |
J14301 |
P1 |
B1 |
D0 |
J13600 |
P0 |
B0 |
D3 |
J13601 |
P0 |
B1 |
D3 |
J13500 |
P0 |
B0 |
D2 |
J13501 |
P0 |
B1 |
D2 |
J13400 |
P0 |
B0 |
D1 |
J13401 |
P0 |
B1 |
D1 |
J13300 |
P0 |
B0 |
D0 |
J13301 |
P0 |
B1 |
D0 |
|
|
CPU3 and CPU2 Memory
SOCKET |
CPU |
BANK |
DIMM |
J16600 |
P3 |
B0 |
D3 |
J16601 |
P3 |
B1 |
D3 |
J16500 |
P3 |
B0 |
D2 |
J16501 |
P3 |
B1 |
D2 |
J16400 |
P3 |
B0 |
D1 |
J16401 |
P3 |
B1 |
D1 |
J16300 |
P3 |
B0 |
D0 |
J16301 |
P3 |
B1 |
D0 |
J15600 |
P2 |
B0 |
D3 |
J15601 |
P2 |
B1 |
D3 |
J15500 |
P2 |
B0 |
D2 |
J15501 |
P2 |
B1 |
D2 |
J15400 |
P2 |
B0 |
D1 |
J15401 |
P2 |
B1 |
D1 |
J15300 |
P2 |
B0 |
D0 |
J15301 |
P2 |
B1 |
D0 |
|
Notes
- Four DIMMs of the same size form a bank.
- A populated DIMM bank requires an UltraSPARC III or UltraSPARC IV CPU.
- 1GB DIMM FRU F540-5086 was reactivated in February 2004.
(WO_28583)
- DIMM 501-7385 was added to F501-5030 in February 2006.
(WO_32424)
- DIMM 501-7386 was added to F501-6109 in February 2006.
(WO_32424)
- DIMM 501-7386 was added to 540-5086 in February 2006.
(WO_32424)
- DIMM 501-7385 was removed from F501-5030 in April 2006.
(WO_32903)
- DIMM 501-7386 was removed from F501-6109 in April 2006.
(WO_32903)
- DIMM 501-7385 was added to Option 7051 in February 2006.
(WO_32418/WO_32562)
- DIMM 501-7386 was added to Option 7056 in February 2006.
(WO_32418/WO_32562)
- The 501-7385 and 501-7386 were added to UniBoard configurations in
February 2006.
- Please see FAB article
1000662.1
for the process for Handling Unapproved DIMM.
Sun Fire 3800-6800 Notes
- For Sun Fire 3800-6800, 1GB DIMMs 501-6109 and 540-5086 are only supported
on 900MHz and faster system boards.
Sun Fire E2900 Notes
- Sun Fire E2900 supports both UltraSPARC III and IV processors.
256MB DIMMs are only supported on UltraSPARC III.
2GB DIMM Notes
- 2GB DIMMs are Not supported with UltraSPARC III or UltraSPARC III Cu.
- SF 3800-6800, SF E2900/E4900/E6900, SF V1280, N1280/1290:
2GB DIMMs require firmware >= 5.20.1.
- SF 12K/15K/E20K/E25K:
2GB DIMMs require SMS >= 1.4.1 with patches >=
117371-07
and >=
118595-02.
- 2GB DIMMs in the 15K and early shipped E25K require A196 power supply
300-1705 or 300-1917.
Power Supply Upgrade Kit C-HE-POWER-KIT-Z contains six 300-1917
power supplies.
Sun Fire 12K and E20K do not require the A196 power supply.
References
-
Sun Fire Systems Service Manual, 805-7363.
-
Sun Fire High-End and Midrange Systems Memory Module (DIMM) Installation Guide, 806-3281.
-
Sun Fire E2900 Service Manual, 817-4054.
-
Sun Fire E4900/E6900 Service Manual, 817-4120.
|