SunPCi IIIpro
| Codename: Bellerophon Pro |
| Workstations: |
Sun Blade 150, 1500, 2500
Ultra 25, 45 |
| Servers: |
Enterprise 250, 450, 220R, 420R
Sun Fire 280R |
Option 2136
| 375-3203 |
| 3.3/5V 64Bit 33MHz |
Jumper Settings
| JUMPER |
PINS |
SETTING |
DESCRIPTION |
| JP1 |
1-2
1-2 |
In
Out |
Hardware Reset
Normal (default) |
| JP2 |
1-2
1-2 |
In
Out |
From HW Strapping
Strapping from Boot ROM (default) |
| JP3 |
1-2
1-2 |
In
Out |
Diagnostics selection real
Emulate (default) |
| JP4 |
1-2
1-2 |
In
Out |
Add-in platform (default)
Stand-alone platform |
| JP5 |
1-3 |
Out |
Unknown |
| J7 |
1-10 |
Out |
Unknown |
LED Codes
| Color |
Status |
| Off |
SunPCi powered off |
| Solid Green |
SunPCi running normally |
| Solid Amber |
System error, service required |
| Blinking Amber |
SunPCi running or booting up, but continuous
blinking indicates potential problem |
Notes
- The minimum operating system is Solaris 7.
- SunPCi IIIpro ships with two optional daughter cards:
 370-6152 (USB/Firewire Backplate)
530-3284 (Serial/Parallel Port Backplate)
The first daughter card adds two USB ports and one IEEE1394 port.
The second daughter card adds one Serial port and one Parallel port.
- Daughter Cards require adjacent slots on the component side
of the SunPCi IIIpro.
- RS-232 signal levels are used. RS-423 is not available.
Memory Notes
- SunPCi IIIpro ships with one 256MB DDR SODIMM in Slot DIMM 1.
- Sun part number 370-5463 is the 256MB DDR SODIMM, Option 7066.
- Sun part number 370-5967 is the 512MB DDR SODIMM, Option 7067.
Sun Blade 150 Notes
- Install SunPCi IIIpro in Slot 2 for optimal cooling.
- Install XVR-100 in Slot 3 and SunPCi IIIpro in Slot 2 when installing
these two cards.
- The Sun Blade 150 requires 256MB of system memory when SunPCi IIIpro
is installed.
References
SunPCi III Quick Installation Guide, 817-0358.
-
SunPCi III SODIMM Installation Guide, 817-0888.
-
SunPCi III 3.2.2 User's Guide, 817-3631.
-
SunPCi III 3.1 User's Guide, 817-2966.
-
SunPCi III 3.1 Product Notes, 817-2968.
-
SunPCi III 3.0[.01] Product Notes, 817-0359.
-
Installing Optional Hardware for the Preinstalled SunPCi III Product, 817-3276.
-
Sun Blade 2000 and SunPCi III Cards: Installing the Required Card Guide, 817-3695.
|
