2.3GB 8 mm Tape Drive
| Servers: |
SPARCserver 6x0MP |
Options 566 / 802 / 804
| 370-1297 |
370-1405 |
Exabyte EXB-8200
Black Bezel |
Exabyte EXB-8200
Light Grey Bezel |
| Rear View |
 |
|
| Jumper P2 |
| SCSI ID |
(MSB) 1 |
2 |
(LSB) 3 |
| 4 |
In |
Out |
Out |
| 5 |
In |
Out |
In |
| 3 |
Out |
In |
In |
| 2 |
Out |
In |
Out |
| 1 |
Out |
Out |
In |
| 0 |
Out |
Out |
Out |
|
Address Select Switch Cable
 |
In the Desktop Storage Module and External Storage Module, orient
the Address Select Switch Cable as shown, and plug it into P2.
|
Power
- 4.0 Amps @ +5Vdc
- 1.2 Amps @ +12Vdc
- 34.4 Watts
| MX Card |
 |
|
| Dip Switch U32 |
| SWITCH |
SETTING |
DESCRIPTION |
| 1 |
On |
Bypass memory test |
| 2 |
On |
Enable parity checking |
| 3 |
On |
Even byte disconnect |
| 4 |
Off |
Report busy status |
| 5 |
On |
Variable block mode on power up |
| 6 |
Off |
No disconnect during data transfer |
| 7 |
Off |
Not used |
| 8 |
Off |
P6 cartridge type |
|
|
| Manual Eject Switch |
 |
Notes
- The 112 Meter Tape part number is 370-1298-01.
- The Cleaning Kit part number is 370-2344-01.
-
ECO WO_01575 enabled Parity checking on the MX card.
Parity checking is disabled on drives shipped prior to December 1991.
Reference
- Sun 2.3-Gbyte 8mm Tape Drive Configuration Procedures for 56-Inch
Data Center Cabinets, 813-2081.
|
