---

Triple Density Floppy

Workstations:

Sun 4/15, 4/30, 4/40, 4/50, 4/60, 4/65, 4/75 SPARCstation 4, 5, 10, 20

Options 554 / 556 / 560

370-1420	370-1419	540-2509
Sony MP-F420-6-D10 Sun-4/60/65/75 SS10 4 mm Black Bezel	Sony MP-F420-6-A10 Sun-4/15/30/40/50 SS4 / SS5 / SS20 8 mm Black Bezel	Sony MP-F420-6-A10 SS4 / SS5 / SS20 FRU Assembly

Bottom View

Rear View

Notes

1. Use #6-32 mounting screws.
2. Set the drive to unit 0 on switch SW4.
3. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.

Reference

Floppy Installation Manual, 801-6197.

Notes

1. Use 3 mm mounting screws.
2. The default drive address is Unit 0.
3. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.
4. SPARCstation 20 and Ultra 2 multi-processor systems require DC Power Filter cable 530-2316.

Note

1. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.
2. This drive is not compatible with Chassis 340-2915.
3. This drive is compatible with Chassis 340-3397.
4. Chassis 340-3397 was phased into production in July 1996.
5. Chassis 340-2915 was phased out of production in Nov/Dec 1996.

Notes

1. Use 3 mm mounting screws.
2. The default drive address is Unit 0.
3. This drive does not support auto ejection.
4. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.

Notes

1. Use 3 mm mounting screws.
2. The default drive address is Unit 0.
3. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.

Notes

1. Use 3 mm mounting screws.
2. The default drive address is Unit 0.
3. This drive supports 1MB, 1.6MB, and 2MB unformatted capacities.