---

Dual GigabitEthernet / Dual SCSI Ultra-2 PCI Adapter

Codename: Cauldron-S (also Cauldron Saturn, Cauldron Plus)

Workstations:	Ultra 25, 45, 30, 60, 80 Sun Blade 100, 1000, 150, 1500, 2000, 2500
Servers:	Sun Fire V20z, V40z Sun Fire V120, V125, V210, V215, V240, V245, V250, V440, V445 Sun Fire 12K, 15K, E20K, E25K Sun Fire 4800, 4810, 6800, E2900, E4900, E6900 Sun Fire V1280, V480, V490, V880, V890 Sun Fire 280R Enterprise 220R, 250, 420R, 450
Telco:	Netra 120, 1280, 1290, 20, 240, 440 Netra T1 AC200, T1 DC200 Netra t 1120, t 1125, t 1400, t 1405
Disk Arrays:	StorEdge 3120, 3310, 3320 StorEdge S1, D240
Tape Libraries:	StorEdge C4, L500, L8

Option 4422A / 4422A-2

501-6635	501-7490
3.3/5V   32/64Bit   33/66MHz 4422A	3.3/5V   32/64Bit   33/66MHz 4422A-2 L

Notes

1. The minimum operating system is Solaris 8 2/02.
2. Solaris 10 is supported.
3. Each SCSI interface supports Single-Ended (SE) or Low Voltage Differential (LVD) SCSI connections.
4. To configure 501-6635 into an hsPCI I/O assembly (option X4575A) on Sun Fire 12K or 15K, the following patches are required:
   On Solaris 8: >= 116962-01
   On Solaris 9: >= 117171-07
5. Use 1.5' Ethernet Cable 530-3335 without locking tab and RJ45 Female to Female Adapter 130-5586 to workaround BugID 5011918 against 501-6635-04.
   (Cable Kit 530-3336 includes 130-5586 and 530-3335.)
   530-3335 and 130-5586 briefly shipped with X4422A until 501-6635-05 was released.
6. 501-6635-05 fixes BugID 5011918 (WO_29531, July 2004) by positioning connector orientation tab down:
   
7. Install only one X4422A in Sun Fire V40z Slot 2 or 3. Install additional cards in Slot 1,4,5,6, or 7.
8. Refer to Sun Alert article 1000479.1 for information about forced mode with the CE driver.

References

1. Dual Gigabit Ethernet and Dual SCSI/P Adapter Installation and User's Guide, 817-4339.
2. Dual Gigabit Ethernet and Dual SCSI/P Product Notes, 817-4340.