---

PCI Dual Ultra-3 SCSI Host Adapter

Codename: Jasper

Option 6758

375-3057
QLogic QLA10162/66-SUN 3.3/5V 32/64Bit 33/66MHz

Qualified SCSI Cables for Array Connections

StorEdge 3310 and D2
Type	Length	Mktg Part #	Mfg Part #
VHDCI-VHDCI	0.8 m	X1136A	530-2982
VHDCI-VHDCI	1.2 m	X1137A	530-2983
VHDCI-VHDCI	2 m	X1138A	530-2538
VHDCI-VHDCI	4 m	X3830B	530-2984
VHDCI-VHDCI	10 m	X3831B	530-2985
StorEdge S1
Type	Length	Mktg Part #	Mfg Part #
HD68-VHDCI	0.8 m	X1132A	530-2452
HD68-VHDCI	2 m	X3832A	530-2453
HD68-VHDCI	4 m	X3830A	530-2454
HD68-VHDCI	10 m	X3831A	530-2455

Notes

1. The minimum operating system is Solaris 8 with the Recommended Patch Cluster.
2. The necessary drivers (SUNWqus & SUNWqusu for 32-bit and 64-bit configurations, and SUNWqusx & SUNWqusux for 64-bit configurations) and patches for this product are not included in Solaris 8 or 9, but must be downloaded.
   Please see the Release Notes, 816-2157, for downloading details.
3. When using 375-3057 in a multi-initiator configuration with shared StorEdge 3310 or S1 arrays, the jumpers on the board for the appropriate shared SCSI bus must be set to "manual SCSI termination".
   
   • The jumpers for Port 2 are set to manual termination by factory default:
     (J4 and J5 = 2-3)
   • Prior to May 2003, the factory default of Port 1 was automatic SCSI termination:
     (J8 and J9 = 1-2)
     If Port 1 is shared, these jumpers must be changed to manual termination:
     (J8 and J9 = 2-3)
     This became the default setting of J8 and J9 in May 2003. (see ECO WO_26435)
   For details, see BugID 4836405.
4. Qualification on Sun Blade 1000 and 2000 is documented in BugID 4644090.

Reference

1. StorEdge PCI Dual Ultra3 SCSI Host Adapter Installation Guide, 816-2156.
2. StorEdge PCI Dual Ultra3 SCSI Host Adapter Release Notes, 816-2157.