Array Controller
RSM Array 2000 / StorEdge A3000
370-2435 |
540-3600 |
w/o Memory |
16MB MPU 64MB RPA FRU |
Alternating Pattern LED Codes |
|
RSM Array 2000 Codename: Sonoma |
Notes
- The Phase I minimum operating system is Solaris 2.4.
- The Phase II minimum operating system is Solaris 2.5.1.
- Phase II software requires Firmware >=02.04.04.01.
- The M48T18 NVRAM uses an M4T28 SNAPHAT battery.
RSM Array 2000 Notes
- The RSM Array 2000 is a controller and chassis.
- The RSM Array 2000 is also the name of a cabinet mounted RSM Array
2000 controller and chassis with SSA 214/219 RSM disk trays.
- An RSM Array 2000 nameplate is on the RSM Array 2000 chassis in an
RSM Array 2000 cabinet with SSA 214/219 RSM disk trays.
- The RSM Array 2000 was renamed StorEdge A3000 in January 1998.
- Use Array Controller 540-3600 with the RSM Array 2000.
StorEdge A3000 Notes
- The StorEdge A3000 is a controller and chassis.
- The StorEdge A3000 is also the name of a cabinet mounted A3000
controller and chassis with SSA 214/219 RSM disk trays.
- An RSM Array 2000 nameplate is on the StorEdge A3000 chassis in a
StorEdge A3000 cabinet with SSA 214/219 RSM disk trays.
- Use Array Controller 540-3600 with the StorEdge A3000.
Memory Notes
- The Main Processor Unit (MPU) SIMMs serve as processor memory.
- The RAID Parity Assist (RPA) SIMMs serve as cache memory.
- Use 8MB SIMM 370-2438 and 32MB SIMM 370-2439.
- The 370-2438 and 370-2439 are not labeled with a Sun Part Number.
- Memory failures are reported as a pair of two SIMMs.
- Install 32MB SIMMs in SIMM-2 and SIMM-4 for RPA Low Bank.
- Install 32MB SIMMs in SIMM-1 and SIMM-3 for RPA High Bank.
- Install 8MB SIMMs in SIMM-5 and SIMM-6 for MPU DRAM.
- The 540-3600 Array Controller FRU was released October 1997.
References
-
RSM Array 2000 System Manual, 802-7603.
-
RSM Array 2000 Controller Module Installation Guide, 802-7602.
-
RAID Manager Controller Replacement Guide, 805-7854.
|