Sun Blade Storage Module M2
B19-AA |
Sun Blade Storage Module M2 Base 540-7963 |
511-1365 |
540-7963 |
Storage Module M2 Board
|
Storage Module M2 FRU
|
Sun Blade Storage Module M2 Codename: Vela2 |
Notes
- All SAS fabric components (Chassis, NEM, and REM) must support SAS-2.
- Sun Blade 6000 PCI Express 2.0 Midplane 541-3789 or 541-4239 is required.
- B19-AA is supported with Sun Blade T6320 G2, T6340, and X6270 M2.
- T6320 G2 and T6340 with REM 375-3643 is limited to 3Gbps data transfer rate.
- One SAS-2 NEM is required in slot NEM0 for single path support.
- Two SAS-2 NEMs are required for host-to-disk dual path support.
- Sun Blade T6320 G2 and T6340 require REM 375-3643.
- Sun Blade X6270 M2 requires REM 375-3643 or 375-3647.
- The SB6000 CMM requires SW 3.2.1 when T6320, T6340 or X6270 M2 are
used with REM 375-3643 and SB6000 Storage Module M2.
- The SB6000 Storage Module M2 requires SW 1.0.1 when X6270 M2 is
used with REM 375-3647.
References
-
Sun Blade Storage Module M2 Product Notes, 821-0911.
-
Sun Blade Storage Module M2 Service Manual , 821-0912.
-
Sun Blade Storage Module M2 Installation Guide, 821-0913.
|