SCSI Adapter
SPARCstorage FlexiPack / StorEdge FlexiPack
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The ribbon cable is soldered to the printed circuit board.
- Adapter 501-4327 supports two Wide SCSI devices.
- Narrow 50-Pin devices require HD68-Pin to 50-Pin Adapter 370-2819.
- The SPARCstorage FlexiPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
-
SPARCstorage FlexiPack Installation Manual, 802-7737.
SCSI Adapter
SPARCstorage FlexiPack / StorEdge FlexiPack
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The ribbon cable is soldered to the printed circuit board.
- Adapter 501-4356 supports one Narrow SCSI device.
- The SPARCstorage FlexiPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
-
SPARCstorage FlexiPack Installation Manual, 802-7737.
SCSI Adapter
SPARCstorage FlexiPack / StorEdge FlexiPack
Notes
- The SCSI bus length on the SCSI Adapter is approx. 170 mm.
- The ribbon cable is soldered to the printed circuit board.
- Adapter 501-4357 supports one Wide SCSI device.
- The SPARCstorage FlexiPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
-
SPARCstorage FlexiPack Installation Manual, 802-7737.
|