SCSI Adapter
SPARCstorage UniPack / StorEdge UniPack
501-2790 |
80-Pin Disk Options Fast/Wide SCSI |
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The SCSI Adapter is included with Power Supply Assembly 540-2694.
Termination Notes
- The Desktop Storage Pack requires external termination.
- The SPARCstorage UniPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
- SPARCstorage UniPack Hardware Setup Instructions, 802-3227.
SCSI Adapter
StorEdge UniPack
501-4823 |
80-Pin Disk Options Ultra/Wide SCSI |
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The SCSI Adapter is included with Power Supply Assembly 540-3732.
Termination Notes
- The Desktop Storage Pack requires external termination.
- The StorEdge UniPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
- SPARCstorage UniPack Hardware Setup Instructions, 802-3227.
SCSI Adapter
SPARCstorage UniPack / StorEdge UniPack
501-2791 |
CD-ROM Options
Narrow SCSI Tape Options |
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The ribbon cable is soldered to the printed circuit board.
- The SCSI Adapter is included with Power Supply Assembly 540-2674.
Termination Notes
- The Desktop Storage Pack requires external termination.
- The SPARCstorage UniPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
- SPARCstorage UniPack Hardware Setup Instructions, 802-3227.
SCSI Adapter
SPARCstorage UniPack / StorEdge UniPack
501-3108 |
Wide SCSI Tape Options |
Notes
- The SCSI bus length on the SCSI Adapter is approximately 170 mm.
- The ribbon cable is soldered to the printed circuit board.
- The SCSI Adapter is included with Power Supply Assembly 540-3004.
Termination Notes
- The Desktop Storage Pack requires external termination.
- The SPARCstorage UniPack does not require external termination.
- The Upper LED indicates termination of SCSI Data Bits D15 - D8.
- The Lower LED indicates termination of SCSI Data Bits D7 - D0.
Reference
- SPARCstorage UniPack Hardware Setup Instructions, 802-3227.
|