---

Netra CP2040

Codename: Othello

CP2040S-500

501-5721
500MHz 0MB FRU w Front Panel

Jumper Settings

SWITCH	DIP	SETTING	DESCRIPTION
SW0501	1 2	On On	SMC setting for non-HA system
	1 2	Off On	SMC setting for HA system
SW1801	1 2	Off Off	Boot Flash PROM selected (default)
	1 2	On On	User Flash PROM 1 selected
	1 2	Off On	User Flash PROM 1 and 2 selected
	1 2	On Off	ROMBO selected
SW2401	1 1	Off On	SCSI Bus A Termination Power enabled SCSI Bus A Termination Power disabled
	2 2	Off On	SCSI Bus B Termination Power enabled SCSI Bus B Termination Power disabled
	3 3	Off On	SCSI Bus A Termination enabled SCSI Bus A Termination disabled
	4 4	Off On	SCSI Bus B Termination enabled SCSI Bus B Termination disabled

Notes

1. The Hostid and MAC address are in I²C SEEPROM 100-6223 at U3209.
2. Use 256MB Memory mezzanine 375-3024, Option XCP2000-MEM-256.
3. Use 512MB Memory mezzanine 375-3025, Option XCP2000-MEM-512.
4. Use 1GB Memory mezzanine 375-3026, Option XCP2000-MEM-1GB.
5. Use Rear Transition Card 375-0121, Option XCP2040-TRN.
6. Use Rear Transition Card 375-3429, L, Option XCP2040-TRN-4.
7. High Availability (HA) systems use the BD_SEL, HEALTHY, and PCI-RST signals to control each slot.

Reference

Netra CP2040 Technical Reference Manual, 806-4994.