---

Netra CP2300

Netra CP2300 Codename: Snowbird Netra CT 820 Codename: Sanibel21

CP2300-650 / Netra CT 820

375-3121	375-3171	375-3295	F595-7404
650MHz 512MB FRU/CT 820 FRU High Profile Memory CP2300-650-512M CP2300-650-2.5GB CP2300-650-2.5GBHD	650MHz 512MB FRU Low Profile Memory CP2300-650-512MBLP	650MHz 512MB Ericsson FRU Low Profile Memory w/o Front Panel CP2300-650-512-E	650MHz 2.5GB Lucent FRU High Profile Memory 2× 1GB DIMM 370-6768 40GB Disk 375-3163 CP2300-650-2.5GBHD
375-3310	375-3312	375-3313	F594-1639
650MHz 512MB FRU High Profile Memory CP2300-650-512MB-4 CP2300-650-2.5GB-4 CP2300-6502.5GBHD-4 L	650MHz 512MB FRU Low Profile Memory CP2300-650512MBLP4 L	650MHz 512MB Ericsson FRU Low Profile Memory w/o Front Panel CP2300-650-512-E-4 L	650MHz 2.5GB Lucent FRU High Profile Memory 2× 1GB DIMM 371-1560 40GB Disk 375-3285 CP2300-6502.5GBHD4 L

Jumper Settings

SWITCH DIP SETTING DESCRIPTION SW3 1 2 3 4 5 Off* Off* Off* On* On* Proprietary - do not change Proprietary - do not change Proprietary - do not change Proprietary - do not change Proprietary - do not change SW3 6 6 On* Off* 1MB System and 7MB User Flash 7MB System and 1MB User Flash (requires setsmcenv flash-device 4) SW501 SW502 SW503 1-0 1-0 1-9 Off* Off* Off* Transition Card EIDE Disabled PIM A J7(Jn4) I/O<1-64> Enabled PIM A J7 (Jn4) is user defined SW501 SW502 SW503 1-0 1-0 1-9 On On On Transition Card EIDE Enabled PIM A J7(Jn4) I/O<1-29> Disabled PIM A J7 (Jn4) is user defined SW503 0 Off* cPSB Network Mode Enabled Transition Card Ethernet Disabled SW503 0 On cPSB Network Mode Disabled Transition Card Ethernet Enabled *   Default settings SW501, SW502, and SW503 are on the solder side

Notes

1. The minimum OS is Solaris 8 2/02 or Solaris 9.
2. The Operating Environment Installation DVD is required.
3. Use 1GB Memory 370-6768, Option XCP2300-MEM-1GB.
4. Use Rear Transition Card 375-3134, Option XCP2300-TRN.
5. Use 1GB Memory 371-1560, L, Option XCP2300-MEM-1GB-4.
6. Use Rear Transition Card 375-3311, L, Option XCP2300-TRN-4.

UltraSPARC IIi Notes

1. The 650MHz UltraSPARC IIi is similar to the 270-440MHz UltraSPARC IIi.
   Differences include integrated L2 Cache and SDRAM Memory Control.
2. The 650MHz UltraSPARC IIi is based on the 500MHz UltraSPARC IIe.
3. The 650MHz UltraSPARC IIi OBP and OS name is UltraSPARC IIe.

References

1. Netra CP2300 Product Note, 816-7185.
2. Netra CP2300 Transition Card Product Note, 816-7187.
3. Netra CP2300 Technical Reference Manual, 816-7186.
4. Installing Solaris on the Netra CP2300 cPSB Board, 817-1797.
5. Netra CT 820 Installation Guide, 817-2641.
6. Netra CT 820 Service Manual, 817-2642.
7. Netra CT 820 Product Overview, 817-2643.
8. Netra CT 820 Release Notes, 817-2646.