| Telco Systems: |
Netra X6270 M2 |
| 511-1418 |
541-4079 |
541-4078 |
541-4293 |
NX6270-AA-N |
System Board
FAB 271-1418 |
Subassembly
with 511-1418 |
Subassembly
with 541-4079 |
Assembly/FRU
541-4078 + 520-4557 |
Netra X6270 M2 Base
with 541-4293 |
Headers, Jumpers and Switches
| LOCATION |
PINS |
SETTING |
DESCRIPTION |
| J602 |
1-2 |
Out |
Not documented |
| J603 |
1-2 |
Out |
Not documented |
| J702 |
1-2 |
Out |
Not documented |
| J705 |
1-2 |
Out |
Not documented |
| J706 |
1-2 |
Out |
Not documented |
| J2402 |
1-2 |
In |
Not documented |
| J2403 |
1-2 |
In |
Not documented |
| J3402 |
1-3 |
Out |
Not documented |
| J3403 |
1-3 |
Out |
Not documented |
| J3404 |
1-3 |
Out |
Not documented |
| J2601 |
2 |
Out |
Unknown Header |
| J1402 |
5 |
n/a |
REM battery connector |
| J1403 |
5 |
n/a |
REM battery connector |
| J3301 |
10 |
n/a |
CPLD Program Header |
| J3302 |
10 |
n/a |
CPLD Debug Header |
| SW2401 |
n/a |
n/a |
Clear CMOS Button |
| SW3001 |
n/a |
n/a |
Fault Remind Button |
| SW4601 |
n/a |
n/a |
Unknown Button |
| SW4602 |
n/a |
n/a |
Unknown Button |
|
Netra X6270 M2 Server Module Codename: Virgo+ LP |
Notes
- The minimum Solaris operating system is Solaris 10 10/09.
- Heatsink FRU 541-2545 includes Heatsink 310-0161, two 240-6751 SpringScrews,
one 250-1802 Cleaning Wipe and one 310-0065 Shin-Etsu X23-7783D Thermal
Grease Syringe. Heatsink 310-0161 is pre-greased with Shin-Etsu G751.
- The System Board FRU includes two 250-1802 Cleaning Wipes, and
two 310-0065 Shin-Etsu X23-7783D Thermal Grease Syringes.
Memory Installation Notes
- Install memory filler panel 350-1288 in all unused slots.
- Install the first DIMMs in CPU0 and CPU1 slots D8, D5, and D2.
- Install the second DIMMs in CPU0 and CPU1 slots D7, D4, and D1.
- Install the third DIMMs in CPU0 and CPU1 slots D6, D3, and D0.
- Memory speed is dependent on the number of DIMMs and the CPU Front Side Bus.
- Maximum speed is 1333MHz when 1333MHz DIMMs are installed in D8, D5, and D2.
- Maximum speed is 1066MHz when two DIMMs of any speed are installed per channel.
- Maximum speed is 800MHz when three DIMMs of any speed are installed per channel.
- Use of the same DIMM size and speed is recommended for maximum performance.
Cable Notes
- ATO Option 4859A includes four 530-3993 data cables.
- ATO Option 4860A includes one 530-4376 data cable.
- Cable Kit 542-0376 includes four 530-3993 and one 530-4376.
- Cable 530-4376 has one SFF-8087 to four SATA connectors.
References
Netra X6270 M2 Product Notes, 821-0936.
-
Netra X6270 M2 Installation Guide, 821-0937.
-
Netra X6270 M2 Service Manual , 821-0939.
|
