---

SPARC Enterprise T5140 / T5240
System Board Assembly

541-2529	541-2528	541-2931	541-2530
8-Core 1.2GHz FRU 501-7847 + 541-2523	6-Core 1.2GHz FRU 501-7846 + 541-2523	4-Core 1.2GHz FRU 511-1035 + 541-2523	8-Core 1.4GHz FRU 501-7848 + 541-2523
501-7847	501-7846	511-1035	501-7848
8-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-03	6-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-03	4-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-03	8-Core 1.4GHz w/o Tray 541-2523 FAB 270-7846-03

540-7908	540-7934	540-7938	540-7939	540-7940
8-Core 1.6GHz FRU 511-1344 + 541-2523	8-Core 1.4GHz FRU 511-1378 + 541-2523	4-Core 1.2GHz FRU 511-1391 + 541-2523	6-Core 1.2GHz FRU 511-1392 + 541-2523	8-Core 1.2GHz FRU 511-1393 + 541-2523
511-1344	511-1378	511-1391	511-1392	511-1393
8-Core 1.6GHz w/o Tray 541-2523 FAB 270-7846-05	8-Core 1.4GHz w/o Tray 541-2523 FAB 270-7846-05	4-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-05	6-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-05	8-Core 1.2GHz w/o Tray 541-2523 FAB 270-7846-05

SPARC Enterprise T5140 Codename: Maramba 1U SPARC Enterprise T5240 Codename: Maramba 2U

Notes

1. The minimum operating system is Solaris 10 8/07.
2. Handle 330-4979 was modified for proper fit and cable routing for HBA 375-3536.
3. Handle 330-4979-02 has two notches. The change was in March 2008. (WO_38867)

Memory Notes

1. Eight, twelve, and sixteen FBDIMM configurations are supported on the system board.
2. Eight and sixteen FBDIMM configurations are supported on the memory mezzanine.
3. The system board requires sixteen FBDIMMs before installing the memory mezzanine.
4. All FBDIMMs within a CMP must have the same memory size.
5. If Firmware is < 7.1.7.f, all FBDIMMs must have the same memory size.
   
6. Specific Firmware levels support different memory sizes on different CMPs
   (i.e. FBDIMMs in CMP0 can have different memory size than those in CMP1.)
   Supported with Firmware 7.1.7.f.
   Supported with Firmware 7.2.2.e, 7.2.4.e and 7.2.4.f, but
   BugID 6879970 affects mixed memory configurations with these levels.
7. Mixing 1.8V and 1.5V FBDIMMs is not supported.
8. Low Voltage 1.5V FBDIMMs require System Firmware 7.1.6.d.

References

1. SPARC Enterprise T5140 and T5240 Servers Product Notes, 820-3312.
2. SPARC Enterprise T5140 and T5240 Servers Installation Guide, 820-3315.
3. SPARC Enterprise T5140 and T5240 Servers Service Manual, 820-3318.