Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



SPARCstation 4

501-2860 501-2861 501-2862 501-3002
70MHz 16MB 70MHz 0MB
FAB 270-2549
70MHz 32MB 70MHz 0MB FRU
FAB 270-2928

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
J0201 1-2 Out Pin-1=Gnd / Pin-2=POK
J1002 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point rxda
Test point txda
Test point rxdb
Test point txdb
J1104 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point tpe<0>
Test point tpe<1>
Test point tpe<2>
Test point tpe<3>
J1201 1-2
1-2
Out*
In
1= normal
0= -4.5db
J1202 1-2
1-2
Out*
In
1=100 Ohm
0=150 Ohm
J1702
J1703
J1702
J1703
1-2
1-2
2-3
2-3
In*
In*
In
In
Select RS-423
Select RS-423
Select RS-232 (+12V)
Select RS-232 (-12V)
* Default setting

Notes

  1. The minimum OS is Solaris 1.1.2 or Solaris 2.4 Hardware: 11/94.
  2. The PLCC Boot PROM is not a FRU and is not field replaceable.
  3. Serial Port B supports asynchronous operation only.
  4. Sync on green produces a higher than normal green output level when the tcx frame buffer is connected to the 16-inch Sony Mid-Range and 17-inch Nokia Entry-Level Color Monitors. Refer to BugID 1218690.
  5. OBP settings for the SS4 tcx framebuffer use the Pixel frequency instead of the Vertical frequency.
  6. Use the OBP setenv command to change the frame buffer resolution:
    ok setenv fcode-debug? true
    ok reset
    ok setenv output-device screen:r1152x900x94
    ok setenv output-device screen:r1024x768x84

Reference

SPARCstation 4 Service Manual, 802-1529.

SPARCstation 4

SS4-85 / Netra i400

501-2549 501-2578 501-2590 501-2928
85MHz 0MB FRU
FAB 270-2549
85MHz 16MB 85MHz 32MB 85MHz 0MB FRU
FAB 270-2928-01

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
J0201 1-2 Out Pin-1=Gnd / Pin-2=POK
J1002 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point rxda
Test point txda
Test point rxdb
Test point txdb
J1104 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point tpe<0>
Test point tpe<1>
Test point tpe<2>
Test point tpe<3>
J1201 1-2
1-2
Out
In
1= normal (default)
0= -4.5db
J1202 1-2
1-2
Out
In
1=100 Ohm (default)
0=150 Ohm
J1702
J1703
J1702
J1703
1-2
1-2
2-3
2-3
In
In
In
In
RS-423 (default)
RS-423 (default)
RS-232 +12V
RS-232 -12V

Notes

  1. The minimum OS is Solaris 1.1.2 or Solaris 2.4 Hardware: 11/94.
  2. The PLCC Boot PROM is not a FRU and is not field replaceable.
  3. Serial Port B supports asynchronous operation only.
  4. Sync on green produces a higher than normal green output level when the tcx frame buffer is connected to the 16-inch Sony Mid-Range and 17-inch Nokia Entry-Level Color Monitors. Refer to BugID 1218690.
  5. OBP settings for the SS4 tcx framebuffer use the Pixel frequency instead of the Vertical frequency.
  6. Use the OBP setenv command to change the frame buffer resolution:
    ok setenv fcode-debug? true
    ok reset
    ok setenv output-device screen:r1152x900x94
    ok setenv output-device screen:r1024x768x84

Reference

SPARCstation 4 Service Manual, 802-1529.

SPARCstation 4

SS4-110 / Netra i4 / Netra j4

501-3008 501-3009 501-3010
110MHz 0MB FRU
FAB 270-2928-01
110MHz 16MB 110MHz 32MB

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
J0201 1-2 Out Pin-1=Gnd / Pin-2=POK
J1002 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point rxda
Test point txda
Test point rxdb
Test point txdb
J1104 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point tpe<0>
Test point tpe<1>
Test point tpe<2>
Test point tpe<3>
J1201 1-2
1-2
Out
In
1= normal (default)
0= -4.5db
J1202 1-2
1-2
Out
In
1=100 Ohm (default)
0=150 Ohm
J1702
J1703
J1702
J1703
1-2
1-2
2-3
2-3
In
In
In
In
RS-423 (default)
RS-423 (default)
RS-232 +12V
RS-232 -12V

Notes

  1. The minimum OS is Solaris 1.1.2 or Solaris 2.4 Hardware: 11/94.
  2. The PLCC Boot PROM is not a FRU and is not field replaceable.
  3. Serial Port B supports asynchronous operation only.
  4. Sync on green produces a higher than normal green output level when the tcx frame buffer is connected to the 16-inch Sony Mid-Range and 17-inch Nokia Entry-Level Color Monitors. Refer to BugID 1218690.
  5. OBP settings for the SS4 tcx framebuffer use the Pixel frequency instead of the Vertical frequency.
  6. Use the OBP setenv command to change the frame buffer resolution:
    ok setenv fcode-debug? true
    ok reset
    ok setenv output-device screen:r1152x900x94
    ok setenv output-device screen:r1024x768x84

Reference

SPARCstation 4 Service Manual, 802-1529.

SPARCstation 4

SS4-110 / Netra i4 / Netra j4

501-3109 501-3111 501-3134
110MHz 0MB FRU
FAB 270-2928-02
w Standoff 240-2196
110MHz 32MB 110MHz 0MB FRU
FAB 270-2928-02
w Standoff 240-2308

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
J0201 1-2 Out Pin-1=Gnd / Pin-2=POK
J0501 1-2
2-3
In
In
Disable sync on green
Enable sync on green
J1002 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point rxda
Test point txda
Test point rxdb
Test point txdb
J1104 1-2
3-4
5-6
7-8
Out
Out
Out
Out
Test point tpe<0>
Test point tpe<1>
Test point tpe<2>
Test point tpe<3>
J1201 1-2
1-2
Out
In
1= normal (default)
0= -4.5db
J1202 1-2
1-2
Out
In
1=100 Ohm (default)
0=150 Ohm
J1702
J1703
J1702
J1703
1-2
1-2
2-3
2-3
In
In
In
In
RS-423 (default)
RS-423 (default)
RS-232 +12V
RS-232 -12V

Notes

  1. The minimum OS is Solaris 1.1.2 or Solaris 2.4 Hardware: 11/94.
  2. The PLCC Boot PROM is not a FRU and is not field replaceable.
  3. Serial Port B supports asynchronous operation only.
  4. Sync on green produces a higher than normal green output level when the tcx frame buffer is connected to the 16-inch Sony Mid-Range and 17-inch Nokia Entry-Level Color Monitors. Refer to BugID 1218690.
  5. OBP settings for the SS4 tcx framebuffer use the Pixel frequency instead of the Vertical frequency.
  6. Use the OBP setenv command to change the frame buffer resolution:
    ok setenv fcode-debug? true
    ok reset
    ok setenv output-device screen:r1152x900x94
    ok setenv output-device screen:r1024x768x84

Reference

SPARCstation 4 Service Manual, 802-1529.

  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback