---

Sun Blade X8440 Server Module

A98-AA	X5199A-Z	X5200A-Z
0MB Memory w/o Processor w/o Disk Drive	8GB Memory 2 × 3.0GHz Opteron 8222	16GB Memory 4 × 3.0GHz Opteron 8222

501-7611	541-1950	F541-1950
0MB Board w/o Sheetmetal L	0MB Assembly w/o Processors w/o Heatsinks L	0MB FRU w/o Processors with Heatsinks

Headers and Jumpers

LOCATION	PINS	SETTING	DESCRIPTION
J1_9	1-16	Out	Unknown (default)
J0401_9	7-8	In	Unknown (default)
J1101	1-10	Out	Unknown (default)
J1401_9	1-10	Out	Unknown (default)
J1901	15-16	In	Unknown (default)
J1901	17-18	In	Unknown (default)
J1901	19-20	Out	Unknown (default)
J1902	1-10	Out	Unknown (default)
J4805	1-20	Out	Unknown (default)
J4806	1-6	Out	Unknown (default)
J5201	1-16	Out	Unknown (default)

Sun Blade X8440 Server Module Codename: A4F+ and Mira

Notes

1. The minimum Solaris operating system is Solaris 10 6/06 x64.
2. Two processor configurations require two Baffle 541-2755.
3. Two processor configurations require one HT Terminator 371-2481.
4. Option 5189A-Z includes one 371-2481 and two 541-2755.

Module Notes

1. Use a 9/64-inch Allen wrench to remove the heatsink shoulder screws.
2. The Module FRU includes four pre-greased heatsinks.
3. The Module FRU includes four alcohol wipes and four thermal grease syringes.
4. The Module FRU does not include heatsink mounting hardware.
5. Use shoulder screw 240-4717, spring 240-4762, and washer 240-4841.
6. Each syringe includes 0.5 Grams (@ 0.3ml) of ShinEtsu G751 thermal grease.
7. Each Opteron processor requires approximately 0.1ml of thermal grease.
8. Use a pre-greased heatsink or a thremal grease syringe, but not both.

References

1. Sun Blade 8000 Modular System Installation Guide, 819-5647.
2. Sun Blade 8000 Modular System Product Notes, 819-5651.