Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback


Sun Fire V40z

501-6883
Newisys S00401 or S01625
Motherboard 370-6929 + BIOS/Firmware
A57A-AA Chassis FRU 380-1010
MAC Address 00093dxxxxxx

Jumpers

LOCATION PINS SETTING DESCRIPTION
J19 1-2
1-2		 Out
In		 Port A is Port A (default)
Port A is Service Processor Console
J125 1-2
2-3		 In
In		 Clear CMOS on next boot
Normal CMOS Operation (default)
JP11 * 1-2
1-2		 In
Out		 BIOS Main Body Write Enabled (default)
BIOS Main Body Write controlled by BIOS or SP
JP12 * 1-2
1-2		 In
Out		 BIOS Boot Block Write Enabled (default)
BIOS Boot Block Write controlled by SP
* Leave JP11 and JP12 in the default position.

HyperTransport/PCI Interrupt Map

HT/PCI BRIDGE DEVICE IRQ A IRQ B IRQ C IRQ D
AMD-8131 Golem 0-B PCI Slot 2 x x x x
AMD-8131 Golem 0-B PCI Slot 3 x x x x
AMD-8131 Golem 0-A BCM5703 Ethernet 0
x

AMD-8131 Golem 0-A BCM5703 Ethernet 1

x
AMD-8131 Golem 0-A 53C1020 SCSI


x
AMD-8131 Golem 0-A PCI Slot 1 x x x x
AMD-8131 Golem 1-A PCI Slot 6 x x x x
AMD-8131 Golem 1-B PCI Slot 7 x x x x
AMD-8131 Golem 2-A PCI Slot 4 x x x x
AMD-8131 Golem 2-B PCI Slot 5 x x x x

LEDs

LOCATION COLOR STATE DESCRIPTION
LD8 Amber Fault CPU1 Status
LD9 Amber Fault CPU1 CPU VRM Status
LD10 Amber Fault CPU1 Memory VRM Status
LD11 Amber Fault DVD Status
LD12-15 Amber Fault CPU1 DIMM 0-3 Status
LD16 Amber Fault CPU0 Status
LD17 Amber Fault CPU0 CPU VRM Status
LD18 Amber Fault CPU0 Memory VRM Status
LD19 Amber Fault Floppy Status
LD20-23 Amber Fault CPU0 DIMM 0-3 Status
LD25-31 Amber Fault PCI Slot 1-7 Status
LD46 Green Normal Service Processor Status
LD48 Green Normal Service Processor Status
LD56 Green Normal Ethernet Connected to Upper MGMT Port
LD57 Green Normal Ethernet Connected to Lower MGMT Port
LD61 Green Normal CPU0 Memory VRM 2.5V Power OK
LD62 Green Normal CPU0 Memory VRM 1.25V Power OK
LD64 Green Normal CPU1 Memory VRM 2.5V Power OK
LD65 Green Normal CPU1 Memory VRM 1.25V Power OK
Notes:
LED locations are abbreviated D on the system board illustration.
No information is available for other LED locations.
The normal state of D46 and D48 is an illuminated Green LED.
The normal state of D56 is a illuminated Green LED when a cable is connected.
The normal state of D57 is a illuminated Green LED when a cable is connected.

Sun Fire V40z Codename: Stinger4P

Notes

  1. The Sun Fire V40z System Board is not a Field Replaceable Unit.
  2. System Board 501-6883 is installed in Chassis CRU 380-1010.
  3. Press F2 during bootup to enter the BIOS menu.
  4. BIOS updates are available at V40z SW 2.8.2 - Bundles.
  5. Due to AMD-8131 Errata 56, BIOS clocks down four-function PCI-X option cards to 100MHz. BIOS 2.32.8.2 (NSV 2.3.0.6h/i) and later releases include a workaround.
    See Release Notes for details about Errata 56.

References

  1. Sun Fire V20z and V40z Servers Installation Guide, 817-5246.
  2. Sun Fire V20z and V40z Servers User Guide, 817-5248.
  3. Sun Fire V20z and V40z Servers Management Guide, 817-5249.
  4. Sun Fire V20z and V40z Servers Release Notes, 819-1771.
  5. Sun Fire V20z and V40z Servers Troubleshooting Techniques and Diagnostics Guide, 817-7184.


Sun Fire V40z

501-7139
Newisys S02399
Motherboard 370-7808 + BIOS/Firmware
A57B-AA Chassis FRU 380-1206
MAC Address 00093dxxxxxx

Jumpers

LOCATION PINS SETTING DESCRIPTION
J19 1-2
1-2		 Out
In		 Port A is Port A (default)
Port A is Service Processor Console
J125 1-2
2-3		 In
In		 Clear CMOS on next boot
Normal CMOS Operation (default)
JP11 * 1-2
1-2		 In
Out		 BIOS Main Body Write Enabled (default)
BIOS Main Body Write controlled by BIOS or SP
JP12 * 1-2
1-2		 In
Out		 BIOS Boot Block Write Enabled (default)
BIOS Boot Block Write controlled by SP
* Leave JP11 and JP12 in the default position.

HyperTransport/PCI Interrupt Map

HT/PCI BRIDGE DEVICE IRQ A IRQ B IRQ C IRQ D
AMD-8131 Golem 0-B PCI Slot 2 x x x x
AMD-8131 Golem 0-B PCI Slot 3 x x x x
AMD-8131 Golem 0-A BCM5703 Ethernet 0
x

AMD-8131 Golem 0-A BCM5703 Ethernet 1

x
AMD-8131 Golem 0-A 53C1020 SCSI


x
AMD-8131 Golem 0-A PCI Slot 1 x x x x
AMD-8131 Golem 1-A PCI Slot 6 x x x x
AMD-8131 Golem 1-B PCI Slot 7 x x x x
AMD-8131 Golem 2-A PCI Slot 4 x x x x
AMD-8131 Golem 2-B PCI Slot 5 x x x x

LEDs

LOCATION COLOR STATE DESCRIPTION
LD8 Amber Fault CPU1 Status
LD9 Amber Fault CPU1 CPU VRM Status
LD10 Amber Fault CPU1 Memory VRM Status
LD11 Amber Fault DVD Status
LD12-15 Amber Fault CPU1 DIMM 0-3 Status
LD16 Amber Fault CPU0 Status
LD17 Amber Fault CPU0 CPU VRM Status
LD18 Amber Fault CPU0 Memory VRM Status
LD19 Amber Fault Floppy Status
LD20-23 Amber Fault CPU0 DIMM 0-3 Status
LD25-31 Amber Fault PCI Slot 1-7 Status
LD46 Green Normal Service Processor Status
LD48 Green Normal Service Processor Status
LD56 Green Normal Ethernet Connected to Upper MGMT Port
LD57 Green Normal Ethernet Connected to Lower MGMT Port
LD61 Green Normal CPU0 Memory VRM 2.5V Power OK
LD62 Green Normal CPU0 Memory VRM 1.25V Power OK
LD64 Green Normal CPU1 Memory VRM 2.5V Power OK
LD65 Green Normal CPU1 Memory VRM 1.25V Power OK
Notes:
LED locations are abbreviated D on the system board illustration.
No information is available for other LED locations.
The normal state of D46 and D48 is an illuminated Green LED.
The normal state of D56 is a illuminated Green LED when a cable is connected.
The normal state of D57 is a illuminated Green LED when a cable is connected.

Sun Fire V40z Codename: Stinger4P

Notes

  1. The Sun Fire V40z System Board is not a Field Replaceable Unit.
  2. System Board 501-7139 is installed in Chassis CRU 380-1206.
  3. Dual Core Opteron requires BIOS 2.33.5.2 (Network Shared Volume 2.3.0.11).
    BIOS 2.33.5.2 is installed in Chassis FRU 380-1206-02.
  4. Press F2 during bootup to enter the BIOS menu.
  5. BIOS updates are available at V40z SW 2.8.2 - Bundles.
  6. Due to AMD-8131 Errata 56, BIOS clocks down four-function PCI-X option cards to 100MHz without notification.
    See Release Notes for details about Errata 56.
  7. The BCM5704 Ethernet Controller on System Board 501-7139 requires an Install-Time Update (ITU) to install Solaris 9 4/04 x86 or Solaris 9 9/04 x86. Refer to FIN I1154.

References

  1. Sun Fire V20z and V40z Servers Installation Guide, 817-5246.
  2. Sun Fire V20z and V40z Servers User Guide, 817-5248.
  3. Sun Fire V20z and V40z Servers Management Guide, 817-5249.
  4. Sun Fire V20z and V40z Servers Release Notes, 819-1771.
  5. Sun Fire V20z and V40z Servers Troubleshooting Techniques and Diagnostics Guide, 817-7184.


Sun Fire V40z

375-3438
Newisys unknown
A57C-AA Chassis FRU 380-1378
MAC Address 00093dxxxxxx
L

Jumpers

LOCATION PINS SETTING DESCRIPTION
J19 1-2
1-2		 Out
In		 Port A is Port A (default)
Port A is Service Processor Console
J125 1-2
2-3		 In
In		 Clear CMOS on next boot
Normal CMOS Operation (default)
JP11 * 1-2
1-2		 In
Out		 BIOS Main Body Write Enabled (default)
BIOS Main Body Write controlled by BIOS or SP
JP12 * 1-2
1-2		 In
Out		 BIOS Boot Block Write Enabled (default)
BIOS Boot Block Write controlled by SP
* Leave JP11 and JP12 in the default position.

HyperTransport/PCI Interrupt Map

HT/PCI BRIDGE DEVICE IRQ A IRQ B IRQ C IRQ D
AMD-8131 Golem 0-B PCI Slot 2 x x x x
AMD-8131 Golem 0-B PCI Slot 3 x x x x
AMD-8131 Golem 0-A BCM5703 Ethernet 0
x

AMD-8131 Golem 0-A BCM5703 Ethernet 1

x
AMD-8131 Golem 0-A 53C1020 SCSI


x
AMD-8131 Golem 0-A PCI Slot 1 x x x x
AMD-8131 Golem 1-A PCI Slot 6 x x x x
AMD-8131 Golem 1-B PCI Slot 7 x x x x
AMD-8131 Golem 2-A PCI Slot 4 x x x x
AMD-8131 Golem 2-B PCI Slot 5 x x x x

LEDs

LOCATION COLOR STATE DESCRIPTION
LD8 Amber Fault CPU1 Status
LD9 Amber Fault CPU1 CPU VRM Status
LD10 Amber Fault CPU1 Memory VRM Status
LD11 Amber Fault DVD Status
LD12-15 Amber Fault CPU1 DIMM 0-3 Status
LD16 Amber Fault CPU0 Status
LD17 Amber Fault CPU0 CPU VRM Status
LD18 Amber Fault CPU0 Memory VRM Status
LD19 Amber Fault Floppy Status
LD20-23 Amber Fault CPU0 DIMM 0-3 Status
LD25-31 Amber Fault PCI Slot 1-7 Status
LD46 Green Normal Service Processor Status
LD48 Green Normal Service Processor Status
LD56 Green Normal Ethernet Connected to Upper MGMT Port
LD57 Green Normal Ethernet Connected to Lower MGMT Port
LD61 Green Normal CPU0 Memory VRM 2.5V Power OK
LD62 Green Normal CPU0 Memory VRM 1.25V Power OK
LD64 Green Normal CPU1 Memory VRM 2.5V Power OK
LD65 Green Normal CPU1 Memory VRM 1.25V Power OK
Notes:
LED locations are abbreviated D on the system board illustration.
No information is available for other LED locations.
The normal state of D46 and D48 is an illuminated Green LED.
The normal state of D56 is a illuminated Green LED when a cable is connected.
The normal state of D57 is a illuminated Green LED when a cable is connected.

Sun Fire V40z Codename: Stinger4P

Notes

  1. The Sun Fire V40z System Board is not a Field Replaceable Unit.
  2. System Board 375-3438 is installed in Chassis CRU 380-1378.
  3. Dual Core Opteron requires BIOS 2.33.5.2 (Network Shared Volume 2.3.0.11).
    BIOS 2.33.5.2 is installed in Chassis FRU 380-1206-02.
  4. Press F2 during bootup to enter the BIOS menu.
  5. BIOS updates are available at V40z SW 2.8.2 - Bundles.
  6. Due to AMD-8131 Errata 56, BIOS clocks down four-function PCI-X option cards to 100MHz without notification.
    See Release Notes for details about Errata 56.

References

  1. Sun Fire V20z and V40z Servers Installation Guide, 817-5246.
  2. Sun Fire V20z and V40z Servers User Guide, 817-5248.
  3. Sun Fire V20z and V40z Servers Management Guide, 817-5249.
  4. Sun Fire V20z and V40z Servers Release Notes, 819-1771.
  5. Sun Fire V20z and V40z Servers Troubleshooting Techniques and Diagnostics Guide, 817-7184.

  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback