Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



Sun Fire X2100 M2 (A84)

375-3460
P/N DA0S40MB6D3
MAC Address 001636xxxxxx

Jumper Settings

LOCATION PINS SETTING DESCRIPTION
J4 1-2
1-2
Out
In
Normal AST2000 BMC (default)
Disable/Flash AST2000 BMC
J7 1-2
2-3
In
In
Clear CMOS (temporary setting only)
Normal CMOS (default)

Sun Fire X2100 M2 Codename: Leo

Notes

  1. The minimum Solaris operating system is Solaris 10 6/06 x64.
  2. The AST2000 supports a maximum video frequency of 165MHz.
  3. The AST2000 supports display resolutions up to 1600x1200x16-bit@60Hz.
  4. System board removal requires a #2 Phillips Screwdriver and an 5mm nutdriver.
  5. The systems CPU speed and CPU part number is labeled on the blower air duct.
  6. The System Board FRU includes two 250-1802 Cleaning Wipes and
    two 310-0065 Shin-Etsu X23-7783D Thermal Grease Syringes.

Memory Installation Notes

  1. Install the first DIMM pair in slots DIMM 0 (B0D0) and DIMM 1 (B0D1).
  2. Install the second DIMM pair in slots DIMM 2 (B0D2) and DIMM 3 (B0D3).
  3. The system board DIMM silkscreen does not match the nomenclature used on the top cover service label
    or the nomenclature used in the service manual.

Clearing CMOS Notes

  1. Power off the system and disconnect the AC power cord.
  2. Remove the CR2032 battery for 30 seconds.
  3. Reinstall the CR2032 battery.
  4. Reconnect the AC power cord.

References

  1. Embedded Lights Out Manager Administration Guide, 819-6588.
  2. Sun Fire X2100 M2 Installation Guide, 819-6589.
  3. Sun Fire X2100 M2 Service Manual, 819-6591.
  4. Sun Fire X2100 M2 Product Notes, 819-6594.

  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback