|
A1000 - D1000 LEDs
In general any fault status will be shown by a flashing amber LED. A solid
amber LED implies a download or upgrade in progress while
a solid green LED indicates normal operation. Here are the specific codes for
each LED type. All of these assume power is on, unless indicated.
Front LEDs
|
System Power LED
|
Current Status
|
| solid green |
|
|
System Summary FaultLED
|
Current Status
|
| solid amber |
- A system component, such as a disk, cooling canister, or a power supply
needs service
|
Disk Drive LEDs
(Each slot has 1 two color LED)
|
Current Status
|
| off |
|
| solid green |
- Disk drive present, but not active
|
| blinking green |
- Disk drive present and active
|
| solid amber |
- Disk drive has been marked as failed by A1000 controller (A1000 only)
|
Rear LEDs
Power Supply LED
(1 two color LED on each power module)
|
Current Status
|
| solid green |
- Power supply is operating normally
|
| solid amber |
- Power supply has failed, but the other power supply is operating normally,
or when the power cord is unplugged
|
| off |
- Both power supplies are unplugged or both have failed
|
Cooling Canister LEDs
(2 two color LEDs on each module, one for each blower)
|
Current Status
|
| solid green |
- Individual blower is operating normally
|
| solid amber |
- Individual blower has failed
|
| off |
- Cooling canister not inserted
|
D1000 Controller Interface Board
(2 single color LEDs) |
|
Temperature Fault LED
|
Current Status
|
| solid amber |
- Board has detected a thermal fault
|
| off |
|
|
Power LED
|
Current Status
|
| solid green |
- Controller interface board is powered on
|
| off |
- Controller interface board is receiving no power
|
|
A1000 Controller
(6 single color LEDs)
|
|
Controller Fault LED
|
Current Status
|
| solid amber |
- Controller fault detected
|
| off |
- Controller functioning normally
|
|
Controller Activity LED
|
Current Status
|
| solid green |
|
| off |
|
|
Temperature Fault LED
|
Current Status
|
| solid amber |
- Controller board is operating above normal temperature
|
| off |
- Controller temperature is normal
|
|
Controller Power LED
|
Current Status
|
| solid green |
- Controller board is powered on
|
| off |
- Controller board is receiving no power
|
|
Battery Fault LED
|
Current Status
|
| solid amber |
- No battery present or there is a battery fault
|
| off |
|
|
Battery Charge LED
|
Current Status
|
| solid green |
|
| blinking green |
- Battery is in the pre-charging phase
|
| off |
|
|
