Sun Blade T6340 and Sun Netra T6340 Server Module LEDs

LED Name / Color	Status	Description
Locate Button and Locate LED / White	Blinking	The Integrated Lights Out Manager (ILOM) command: set /SYS/LOCATE value=Fast_Blink has been issued or the Locate Button has been pushed.
Locate Button and Locate LED / White	Off	Normal operating state. The Locate LED can be turned off with the ILOM command: set /SYS/LOCATE value=Off or by pushing the Locate button.
Ready-to-Remove LED / Blue	On	Blade is in 'standby' power mode meaning the main power is off but there is still power to Service Processor and power supply fans. The blade can be removed from the chassis.
Ready-to-Remove LED / Blue	Off	Steady state - If LED is off, it is not safe to remove the server module from the chassis. You must use software to take the component offline or shut down the server. To turn off the blue LED, type: set /SYS return_to_service_action=true.
Service Action Required LED / Amber	Off	Normal operation.

	On	The event has been acknowledged, but the problem still requires attention.
Power/OK LED / Green	Off	Server main power and standby power are off.
	Standby Blinking	The system is running at a minimum level.
	Slow Blinking	Server running in standby mode.
	On	Server is in main power mode with power supplied to all components.
Hard Disk Drive Power/OK / Green	Fast Blink	Normal disk activity.
	Slow Blink	RAID activity.
	Off	No disk activity.
Hard Disk Service Action Required / Amber	On	Hard disk fault has been detected.
Hard Disk Ready-to-Remove / Blue	On	Disk is ready to be removed.