Sun StorEdge[tm] L180 Tape Library: Hardware Specifications
|
|
|
|
| 9840 |
Wide, HV Differential SCSI 20 GB Tape Drive |
| 9840B |
9840B Fibre Channel drive, 19 MB/sec transfer
rate, 20 GB native capacity and a 2 GB Fibre Channel interface |
| 9840C |
9840C Fibre Channel, 30 MB/sec transfer
rate, 40 GB native capacity tape drive |
| 9840FC |
9840FC Fibre Channel drive, 9 MB/sec transfer
rate |
| 9940B |
9940B Fibre Channel, 30 MB/sec transger
rate, 200GB native capacity Tape Drive |
| DLT[tm] 7000 |
Quantum DLT 7000 Wide, HV Differential SCSI
35 - 70 GB Tape Drive |
| DLT 8000 |
DLT 8000 Wide, HV Differential SCSI 40 -
80 GB Tape Drive |
| LTO |
LTO High Voltage Differential SCSI Tape
Drive |
| LTO2 |
LTO2 LVD SCSI, 30 MB/sec transfer rate, 200 GB native capacity Tape Drive |
| LTO3 FC |
LTO Fibre Channel, 80MB/sec transfer rate, 400 GB native capacity Tape Drive |
| LTO3 SCSI |
LTO LVD SCSI , 80MB/sec transfer rate, 400 GB native capacity Tape Drive |
| LTO FC |
LTO Fibre Channel Tape Drive (IBM) |
| LTO2 FC |
LTO Fibre Channel, 35 MB/sec transfer rate,
200 GB native capacity tape drive |
| SDLT 320 |
Super DLT320 HVD SCSI, 16 MB/sec transfer rate, 160 GB native capacity Tape Drive |
| SDLT 600 |
Super DLT600 FC, 36MB/sec transfer rate, 300 GB native capacity Tape Drive |
|
|
Library
Enclosure |
Tape Drive |
| AC Voltage Range |
90 - 254 VAC |
90 - 254 VAC |
| Power Cable |
US/Canada - 120 VAC UL/CSA
Intl. - 200 to 240 VAC HAR |
US/Canada - 120 VAC UL/CSA
Intl. - 200 to 240 VAC HAR |
| Power Configuration |
US/Canada - Single phase 100 VAC,
47 to 63 Hz, 20A service, 3 wire
Intl. - Single phase 200 to 240 VAC, 47 to 63 Hz, 10A service, 3
wire
|
US/Canada - Single phase 120 VAC,
47 to 63 Hz, 6A service, 3 wire
Intl. - Single phase 200 to 240 VAC, 47 to 63 Hz, 3A service, 3 wire |
| Power Consumption |
120 W |
972 W |
| Maximum Heat Output |
410 BTU/hr |
3,314 BTU/hr (10 drives) |
| Operating Acoustic Noise |
< 6.5 bels |
| Temperature & Humidity |
Operating - 15 °C to 32 °C
(59 °F to 90 °F), 20% to 80% noncondensing relative humidity
Nonoperating - -20 °C to 60 °C (-4 °F to 140 °F),
5% to 95% noncondensing relative humidity |
| Altitude |
Operating - 0 to 3,050 M (0 to 10,000
feet)
Nonoperating - 0 to 15,240 M (0 to 50,000 feet) shipping
Nonoperating - 0 to 3,050 M (0 to 10,000 feet) storage |
|
|
| Height |
165.4 cm (65.1 in) |
| Width |
71.9 cm (28.3 in) |
| Depth |
124.5 cm (49.3 in) |
| Weight |
6 - 9840 drives, 271.3 kg (598 lb)
10- DLT 7000 drives, 292.6 kg (645 lb)
No drives/cartridges, 239.5 kg (528 lb) |
Regulations
Meets or exceeds the following requirements:
|
| Safety |
UL 1950, cUL, CSA C22.2-No 950-M95, TUV
EN950 |
| Emission |
FCC Class 15B Class A, CE Mark, VCCI Class A |
|
|
| Tape Drive |
Number of tape drives |
Number of cartridges1 |
Cartridge capacity (native) |
Library capacity (native) |
Drive transfer rate |
| 9840 |
6 |
180 |
20 GB |
3.48 TB |
9 MB/sec |
| 9840B |
6 |
180 |
20 GB |
3.48 TB |
19 MB/sec |
| 9840C |
6 |
180 |
40 GB |
6.96 TB |
30 MB/sec |
| 9840FC |
6 |
180 |
40 GB |
6.96 TB |
9 MB/sec |
| 9940B |
6 |
180 |
200 GB |
34.8 TB |
30 MB/sec |
| DLT[tm] 7000 |
10 |
180 |
35 GB |
6.438 TB |
7 MB/sec |
| DLT 8000 |
10 |
180 |
40 GB |
6.96 TB |
7 MB/sec |
| LTO SCSI |
10 |
180 |
100 GB |
17.4 TB |
15 MB/sec |
| LTO2 SCSI2 |
10 |
180 |
200 GB |
34.8 TB |
30 MB/sec |
| LTO3 SCSI |
10 |
180 |
400 GB |
69.6 TB |
80MB/sec |
| LTO FC |
10 |
180 |
100 GB |
17.4 TB |
15 MB/sec |
| LTO2 FC2 |
10 |
180 |
200 GB |
3.48 TB |
30 MB/sec |
| LTO3 FC |
10 |
180 |
400 GB |
69.6 TB |
80MB/sec |
| SDLT 320 |
10 |
180 |
160 GB |
27.84 TB |
16 MB/sec |
| SDLT 600 |
10 |
180 |
300 GB |
52.2 TB |
36MB/sec |
1One slot is reserved for in-transit
cartridges; and, there are slots for 174 data cartridges + 5 cleaning or diagnostic cartridges (1+174+5 = 180).
2When using LTO2 200GB media. If using LTO1 (100GB) media
in LTO2 drive, you get 33% better Read/Write performance over using
the same data cartridge in an LTO1 drive. |
|
|
|
