Sun[tm] LX50: Hardware Specifications
| Racking |
| Fits most 19" industry standard racks. Package
comes with a rack mounting kit, an optional rail based rack mounting kit
(X5027A) is available. The Sun LX50 server does not currently fit into Sun's
custom racks. Before the end of 2002, X-Option brackets will be available
for Sun's racks. |
| Processor |
| Number |
1 or 2 |
| Architecture |
1.4 GHz Pentium III |
| Cache memory |
512KB cache |
| Main
Memory |
| Capacities |
Six DIMM sockets for up to 6GB of registered PC133 ECC SDRAM
|
| Standard
Interfaces |
| Ethernet
1
|
Two ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair
standard connector (RJ-45),
self-sensing |
| Graphics |
One standard VGA port (HD15) |
| Keyboard and mouse
2
|
One standard PS/2 keyboard/mouse port. A PS/2 splitter
(Y-cable) is included to support both keyboard and mouse connections to
the single port. |
| PCI |
One full size 64-bit, 66-MHz, 3.3 V PCI 2.2 slot
One low profile 64-bit, 66/33-MHz PCI 2.2 slot |
| SCSI |
One 16-bit SE or LVD, VHDCI,
SCSI port supporting 40-MB/sec (Ultra-wide SE), 80-MB/sec (Ultra 2), or
160-MB/sec |
| Serial
3
|
Two RS-232 (COM2) serial ports (RJ-45);
one in the front, one in the rear |
| USB |
Four Universal Serial Bus (USB
1.1) ports; two in the front, two in the rear |
1 - If 10/100 Ethernet cards are placed in
the PCI slots, the full size slot becomes eth0 , the low profile slot becomes
eth1 , the bottom rear is eth2 , and the top rear is eth3 . This is the
case for all Intel 10/100 cards. When using other vendors, the ordering
will remain eth0/eth1 on the rear ports.
2 - If a keyboard is required to select BIOS options, to
run the diagnostics, or to select boot options in LILO, you must use a PS/2
keyboard.
3 - Only one port is enabled at a time. By default, the
rear port is enabled until it is automatically disabled by plugging into
the front port. |
| Internal
Mass Storage |
| Disks |
Support for two (three without Floppy/CD-ROM Combo) 36GB or
72GB 10000 RPM SCSI Drives |
| Removable Media |
CD-ROM and Floppy Drive |
| Environment |
| AC input |
100 - 240 VAC, 50 - 60 Hz, 3.6 A(max) |
| Input Power |
250 W |
| Heat output |
853 BTU/hr |
| Temperature |
Operating: 5° to 35° C (41° to 95°
F)
Nonoperating: -40° to 65° C (-40° to 149° F) |
| Humidity |
Operating: 10% to 90% relative humidity at 27°
C noncondensing
Nonoperating: 10% to 93% relative humidity at 38° C noncondensing |
| Acoustic noise |
Idle: <45 dBA
|
| Vibration |
Operating: 0.15 G z-axis; 0.10 G x- and y-axis, 5 to
500 Hz sine
Nonoperating: 0.50 G z-axis; 0.25 G x- and y-axis, 5 to 500 Hz sine |
| Shock |
Operating: 3 G, 11 ms, half-sine |
| Number of cords |
1 |
Regulations
Meets or exceeds the following requirements: |
| FCC Class A, CISPR 22B, VCCI-A, UL, CE, Austel, BSMI, GOST
R, MIC, Nemko GS, Canada ICES-003 Class A |
| Dimensions
and Weights |
| Height |
43mm (1.693 in) |
| Width - with mounting ears |
430mm (16.93 in) |
| Depth - with front bezel |
609mm (23.89 in) |
| Weight |
11.2kg (26 lbs) appx. |
| Shipping Weight (product and packing) |
17.2kg (40 lbs) appx. |
|
