|
Parts Breakdown
This section contains illustrations, part numbers, and descriptions of
Sun Systems, Options, Boards, Input Devices, Monitors, and Printers.
Options such as processor modules, SIMMs, and SBus cards are not included in
Volume II. Internal system peripheral options are not included in the Disk,
Removable Media, or Miscellaneous chapters.
Parts listed as (obsolete) or (obs) are no longer used to build new systems.
Obsolete parts may be replaced with newer part numbers and may not be available.
This manual provides a list of part numbers used to assemble the system or
option. Many of the part numbers listed are not normally available as spare
parts or as field replaceable service spares, also referred to as Field
Replaceable Units, or FRUs.
Spare parts available for purchase are listed in the SunSpares Price
List. A list of valid FRU part numbers and part substitutions is
available to Sun service and support personnel from SunService logistics.
Standard Configurations and Standard Options supported by Sun Microsystems
are documented in the End User Price List, Reseller Price List, Hardware
Configuration Guides, Product Brochures, and Hardware Installation Manuals.
Abbreviations
Abbreviations used in this section are described below.
| Assy |
Assembly |
| NS |
Not shown |
| Obs |
Obsolete |
| Dis |
Disqualified |
| w |
With |
| w/o |
Without |
|
Indicates the part is used in an assembly |
| FRU |
Field Replaceable Unit |
Class Codes
The first three digits of a Sun part number are the class code.
Representative class codes are listed below.
| CLASS CODE |
DESCRIPTION |
| 270-xxxx-xx |
PCB Fabrication |
| 300-xxxx-xx |
Power Supply |
| 330-xxxx-xx |
Plastic Part |
| 340-xxxx-xx |
Sheet Metal Part |
| 365-xxxx-xx |
Monitor Assembly |
| 370-xxxx-xx |
OEM Part |
| 500-xxxx-xx |
Untested PCB |
| 501-xxxx-xx |
Tested PCB |
| 520-xxxx-xx |
Programmed IC |
| 525-xxxx-xx |
Programmed IC |
| 530-xxxx-xx |
Cable |
| 540-xxxx-xx |
Assembly |
| 555-xxxx-xx |
FRU Assembly |
| 560-xxxx-xx |
Shipping Kit |
| 570-xxxx-xx |
Electro Mechanical Assembly |
| 595-xxxx-xx |
Top Level Option Assembly |
| 596-xxxx-xx |
Configured Option Assembly |
| 600-xxxx-xx |
Top Level System Assembly |
| 700-xxxx-xx |
Software Tape |
| 704-xxxx-xx |
Software CD-ROM |
| 790-xxxx-xx |
Software Tape and Manual |
| 794-xxxx-xx |
Software CD-ROM and Manual |
| 800-xxxx-xx |
Sun Manual |
| 801-xxxx-xx |
Sun Manual |
| 802-xxxx-xx |
Sun Manual |
| 804-xxxx-xx |
CD-ROM Insert |
| 807-xxxx-xx |
FCO Kit |
| 813-xxxx-xx |
Configuration Manual |
| 825-xxxx-xx |
Manual Set |
| 855-xxxx-xx |
Manual Set |
| 950-xxxx-xx |
Engineering Specification |
Part Numbers
Sun part numbers consist of nine numerical digits separated with dashes (-)
into three components; Class Code, Base Number, and Dash Number. A revision
number or letter is used with each part number.
Class Codes identify similar parts.
Base Numbers are assigned sequentially. A higher base number does
not necessarily indicate a new or improved part.
- Higher/Lower Base Number Examples
| PART # |
DESCRIPTION |
RELEASE DATE |
300-1281
300-1286 |
SC2000 Power Supply
SC2000 Power Supply |
3/28/95
9/19/94 |
501-2925
501-2940
501-3001 |
SM71 SuperSPARC 2.4.5
SM71 SuperSPARC 2.3
SM71 SuperSPARC 2.4.3 |
9/28/95
6/05/95
8/14/95 |
501-2324
501-2924
501-2961 |
SS20 CPU
SS20 CPU
SS20 CPU* |
1/10/94
9/14/95
7/12/95 |
* 501-2961 is a screened and re-labeled 501-2324.
Dash Numbers are used to identify changes made to the part that
affect form, fit, or function.
Revision Numbers are used to identify changes made to the part that
do not affect form, fit, or function.
System Serial Number
The system serial number contains four fields of information:
- Year - year of manufacturer
Week - week of manufacturer
Plant - manufacturing location
Serial number - numeric or alphanumeric serial number
Example:
Plant Code
| CODE |
LOCATION |
| C |
Mountain View Building 4, California |
| F |
Milpitas Building 4, California |
| G |
Westford, Massachusetts |
| H |
Singapore (Sun-3 Shoebox) |
| K |
Milpitas Building 5, California |
| L |
Milpitas Building 7, California (Specials Engineering) |
| M |
Linlithgow, Scotland |
| N |
Japan |
| P |
Billerica, Massachusetts |
| R |
Japan (used by Fuji Xerox) |
| T |
Milpitas, California (Re-Manufacturing) |
Tools
| PART # |
DESCRIPTION |
| 250-1028 |
Field Engineer Toolkit (Jensen JTK-679-1) |
| 250-1024 |
T9 Torx Screwdriver |
| 250-1025 |
T7 Torx Screwdriver |
| 250-1026 |
T25 Torx Blade |
| 250-1017 |
#2 Pozidrive Blade |
| 250-1029 |
3/32" Hexdriver Blade |
| 250-1030 |
7/64" Hexdriver Blade |
| 250-1031 |
14 mm Deep Socket |
| 250-1032 |
T20 Torx Blade |
| 250-1033 |
Blue Cordora Zipper Case |
| 250-1034 |
3 1/8" Driver Handle |
| 250-1035 |
4 1/8" Driver Handle |
| 250-1036 |
1/4" Drive Spinner Handle |
| 250-1037 |
5" Extension Blade |
| 250-1038 |
#1 Phillips Blade |
| 250-1039 |
#2 Phillips Blade |
| 250-1040 |
1/4" Slotted Blade |
| 250-1041 |
3/16" Slotted Blade |
| 250-1042 |
Alignment Tool |
| 250-1043 |
Alignment Tool |
| 250-1044 |
4 1/2" Miniature Diagonal Cutter |
| 250-1045 |
5.25" Diagonal Cutting Pliers |
| 250-1046 |
6.5" Thin Needlenose Pliers |
| 250-1047 |
4" Adjustable Wrench |
| 250-1048 |
6" Adjustable Wrench |
| 250-1049 |
Crimping Tool/Wire Stripper |
| 250-1050 |
Fluke 75 Digital Multimeter |
| 250-1051 |
1.27 mm Hexdriver Blade |
| 250-1052 |
1.5 mm Hexdriver Blade |
| 250-1053 |
2 mm Hexdriver Blade |
| 250-1054 |
2.5 mm Hexdriver Blade |
| 250-1055 |
3 mm Hexdriver Blade |
| 250-1056 |
4 mm Hexdriver Blade |
| 250-1057 |
5 mm Hexdriver Blade |
| 250-1058 |
4 mm Nutdriver Blade |
| 250-1059 |
4.5 mm Nutdriver Blade |
| 250-1060 |
5 mm Nutdriver Blade |
| 250-1061 |
5.5 mm Nutdriver Blade |
| 250-1062 |
6 mm Nutdriver Blade |
| 250-1063 |
7 mm Nutdriver Blade |
| 250-1064 |
8 mm Nutdriver Blade |
| 250-1065 |
9 mm Nutdriver Blade |
| 250-1066 |
10 mm Nutdriver Blade |
| 250-1067 |
11 mm Nutdriver Blade |
| 250-1068 |
T15 Torx Blade |
Power Screwdriver Kit
| PART # |
DESCRIPTION |
| 250-1075 |
Cordless Power Screwdriver Kit (Jensen JTK-864) |
| 250-1076 |
Two Speed Power Screwdriver |
| 250-1077 |
Screwdriver Carrying Case |
| 250-1078 |
Screwdriver Battery Charger, 115V |
| 250-1079 |
Screwdriver Battery |
| 250-1084 |
Power Screwdriver Xcelite Adapter |
Vacuum Cleaner Kit
| PART # |
DESCRIPTION |
| 250-1080 |
Vacuum Cleaner Kit (Jensen JTK-863) |
| 250-1081 |
Vacuum Cleaner, 115V |
| 250-1082 |
Vacuum Cleaner Filters (qty 6) |
| 250-1083 |
Vacuum Cleaner Carrying Bag |
Miscellaneous Tools
| PART # |
DESCRIPTION |
| 240-1433 |
2 mm Hex Key |
| 240-1716 |
AMP SIMM Extraction Tool (obsolete) |
| 240-1718 |
EPROM Insertion Tool |
| 240-1719 |
IC Extraction Tool |
| 240-1822 |
Modified AMP SIMM Extraction Tool (obs) |
| 240-1904 |
1/2" Open-End Wrench |
| 250-1007 |
Disposable ESD Wrist Strap |
| 250-1011 |
Slotted & 2 mm Hex Screwdriver |
| 250-1072 |
1/2" x 1/2" Thin-Head Wrench for 56" Rack Levelers |
| 250-1074 |
10-Inch End Cutter |
| 250-1088 |
Sun ESD Mat with Sun Logo |
| 330-1145 |
Disposable ESD Mat |
| 330-1646 |
SS10 and SS20 SIMM Insertion Tool (order 560-1936) |
| 330-1836 |
SS20 Fan Installation Tool |
| 330-1852 |
SS Voyager Power Supply Extraction Tool |
| 345-1131 |
SIMM Extraction Wire Tool (obsolete) |
| 345-1132 |
SIMM Extraction Wire Tool (obsolete) |
| None |
T8 Torx Blade (Xcelite 99-8XTD) |
| None |
T10 Torx Blade (Xcelite 99-10XTD) |
| 370-1906 |
90° L-Key T10 Torx |
| 370-1907 |
90° L-Key T15 Torx |
| 560-1763 |
SIMM Extraction Tool Kit |
| 345-1184 |
Machined SIMM Extraction Tool 345-1184-01 (obsolete)
Diecast SIMM Extraction Tool 345-1184-02 |
Last updated: December 2, 1996
|
