| Capacity |
| Number |
Up to 8 disks
|
| Type |
2.5 inch (SFF) SAS
|
| Data Rate |
1.5 and 3.0 Gbit/s SAS with auto-negotiation
2-1x or 1-x2 wide connections into blade. 12Gb/s total
|
Storage
|
| Disks |
Drive Type
|
Density
|
Speed
|
Form Factor
|
SAS
|
73 GB
|
15K RPM
|
2.5"
|
SAS
|
73 GB
|
10K RPM
|
2.5"
|
SAS
|
146 GB
|
10K RPM
|
2.5"
|
SAS
|
300 GB
|
10K RPM
|
2.5"
|
|
Management Environment
|
| Sun Blade Disk Module Management |
Sun Blade 6000 chassis-level management is provided by the Chassis Monitoring Module's (CMM) Integrated Lights-Out Management (ILOM) software. ILOM provides basic information for disk blades or SES-NEMs. The ILOM GUI recognizes the presences of SAS-NEMs and disk blades. Only the ILOM command-line interface (CLI) is available for use with disk and SAS-NEM modules proxy program.
The Sun Blade 6000 Disk Module supports enclosure management features accessible from a management client that supports SES-2 (SCSI Enclosure Services). The Sun Blade 6000 Disk Module expanders are SES-2 compliant. These enclosure management features are available through the management software called the Sun Common Array Manager (CAM). Support for the Sun Blade Disk Module and SAS-NEMs is available beginning with CAM version 6.1.2. CAM offers these capabilities and more:
- Event and fault monitoring
- E-mail alert notification
- FRU identification and status
- Enclosure reset
- Enclosure firmware upgrade
- Fault isolation
- Service Advisor wizard for problem resolution
- Sun Auto Service Request (ASR) uses fault telemetry 24/7 to automatically initiate a service
request and begin the problem resolution process as soon as a problem occurs
|
| Environment |
| Cooling |
Front to back forced air
|
| Humidity |
10-90% non-condensing
|
| Temperature |
5-50 ° C operating (-40-70 ° C storage)
|
| Altitude |
0-10000ft (3048 meters)
|
Regulations
Meets or exceeds the following requirements: |
| RoHS Compliance Level |
RoHS:YL |
| Product Safety |
- cUR approved to UL 60950-1 and C22.2 No. 60950-1
- CE Marked to European Union Low Voltage Directive 2006/95/EC
- CB Report IEC 60950-1; including all ameendments and full worldwide deviations
- GOST Certification at chassis level.
- China CCC Mark for power supply only (system is exempt since it is rated greater than 1300W).
- CE Declaration of Conformity.
- Argentina S-Mark for power supply only (system exempt due to class of product).
|
| Laser Product and Optical I/O |
- FCC Regulation to Code of Federal regulations 21 CFR 1040-Lasers.
- TUV approval to IEC 60825-1 Safety of Laser Products.
- Canadian Radiation Emitting Devices Act REDR C1370.
|
| Emissions and Immunities: |
| Electromagnetic Interference |
- 47 CFR 15B (Code of Federal Regulations, Part 15, Subpart B) Class A.
- EN55022:1998 Class A per EMC directive 89/336/EEC (CE Mark).
- EN55022:1998 Class A per EMC directive 89/336/EEC (CE Mark).
- VCCI Class A.
- Industry Canada ICES-003.
- AS/NZ 3548 (Australia/New Zealand).
- CNS 13438 (Taiwan).
- Korean MIC Certification.
- GOST Certification at system chassis level.
|
| Immunity |
- EN55024:1998 per EMC Directive 89/336/EEC.
- IEC 61000-4-2 Electrostatic discharge immunity test.
- IEC 61000-4-3 Radiated, radio-frequency, electromagnetic field immunity test.
- IEC 61000-4-4 Electrical fast transient/burst immunity test.
- IEC 61000-4-5 Surge immunity test.
- IEC 61000-4-6 Immunity to conducted disturbances, induced by radio-frequency fields.
- IEC 61000-4-8 Power frequency magnetic field immunity test.
- IEC 61000-4-11 Voltage dips, short interruptions, and voltage variations immunity tests.
- GOST Certification at system chassis level.
- Korean MIC Certification.
|
| Line Distortion |
EN 61000-3-2 per EMC Directive 89/336/EEC. |
| Voltage Fluctuations and Flicker |
EN 61000-3-3 per EMC Directive 89/336/EEC. |
| Dimensions
and Weights |
| Blade Height |
Height = 1.75 in (44.45mm) |
| Blade Width |
Width = 12.88 in (327.15mm) |
| Blade Depth |
Depth = 19.56 in (496.82mm) |
| Weight |
Diskless 13.8 lbs (6.26 kg).
8 Disks:18.25 lbs (8.28kg) |
