| Processor |
| Number |
Up to eight |
| Architecture |
1.35GHz UltraSPARC[tm] IV, 1.5GHz, or 1.8GHz UltraSPARC IV+
|
| Cache memory |
64-KB data and 32-KB instruction per pipeline
Secondary: 16-MB external (8-MB per pipeline), 2-MB on chip L2 cache
|
| Main
Memory |
| Capacities |
Total of 16 DIMM memory slots available per CPU/Memory board
512MB, 1GB, or 2GB (32GB maximum per CPU/Memory board, 128GB maximum
when configured with 8 processors)
Note: Install DIMMs in groups of four.
It is REQUIRED to fully populate all memory DIMMs on 2.1GHz, 1.8GHz, 1.5GHz, and 1.35GHz CPU/memory Boards
|
| Standard
Interfaces |
| Ethernet |
- One Gigabit ethernet (1000BASE-SX)
- One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair standard
connector (RJ-45)
|
| Keyboard and mouse |
USB (uses one of the two standard USB
(Type A) port) |
| PCI |
PCI slots are hot-pluggable
- Seven slots, 64 bit, operating at 33MHz (5V)
- Two slots (slots 7 and 8), 64 bit, operating at 33 or 66MHz (3.3V)
|
| Remote System Controller |
- One EIA-232D serial port (RJ-45)
- One 10 Mbps Ethernet port (RJ-45)
|
| Serial |
Two EIA-232D/EIA-423 serial ports (DB25)
via splitter cable (X985A) |
| USB |
Two USB 1.0 ports
|
| Internal
Mass Storage |
| Disks |
Up to 12 1" 10000 RPM FC-AL disks,
73GB and 146GB capacity. Maximum total capacity of 1.75TB. |
| DVD-ROM |
16X ATAPI DVD-ROM Drive |
| Tape |
Optional 36-72GB 4 mm DAT 72 Tape Drive |
| Power
Supplies |
| Type |
2 minimum, 3 for N+1 redundancy, individual power cords |
| Output |
1629W maximum per power supply |
| Environment |
| AC Power |
200-240 VAC, 47-63 Hz, 2078VA
|
| Input power |
3200 W (max) |
| Leakage Current |
3.5mA (max) |
| Heat output |
10,912 BTU/hr (max)
|
| Temperature |
Operating: 5° C to 35° C (41° F to 95° F)
Nonoperating: -20° C to 60° C (-4° F to 140° F) |
| Humidity |
Operating: 20% to 80% relative humidity, noncondensing; 27° C max wet bulb
Nonoperating: 95% relative humidity, noncondensing at 40° C |
| Altitude |
Operating: 0 to 3000 m (0 to 10,000 ft.)
Nonoperating: 0 to 12,000 m (0 to 40,000 ft.) |
| Acoustic noise |
Operating: 66.5 dBA
ok prompt: 75.7 dBA |
| Vibration |
Operating: 0.0002 G2/Hz, 5 - 500 Hz
(random) (deskside)
0.00015 G2/Hz, 5 - 500 Hz (random) (rackmounted)
Nonoperating: 0.002 G2/Hz, 5 - 500 Hz (random)
(deskside)
0.0015 G2/Hz, 5 - 500 Hz (random) (rackmounted)
|
| Shock |
Operating: 4 G peak, 11 milliseconds half-sine pulse (deskside)
3 G peak, 11 milliseconds half-sine pulse (rackmounted)
Nonoperating: 15 G peak, 11 milliseconds half-sine pulse (deskside)
10 G peak, 11 milliseconds half-sine pulse (rackmounted) |
| Handling Drops |
50 mm |
| Threshold Impact |
1 m/s |
| Number of cords |
3 |
Regulations
Meets or exceeds the following requirements: |
| RoHS Compliance Level |
RoHS:YL |
| Safety |
UL/CSA-60950-1, EN60950-1, IEC60950-1 CB Scheme with all country deviations, IEC825-1, 2, CFR21 part1040, CNS14336
|
| Ergonomics |
EK1-ITB-2000 |
| RFI/EMI |
EN55022 Class A, 47 CFR 15B Class A, ICES Class A, VCCI Class A, AS/NZ 3548 Class A, CNS 13438 Class A, KSC 5858 Class A, GB 9254 Class A, EN61000-3-2, GB 17625.1, EN61000-3-3
|
| Immunity |
EN55024/CISPR24
|
| Regulatory Markings |
CE, FCC, ICES-003, C-tick, VCCI, GOST-R, BSMI, MIC, UL/cUL, UL/S-mark
|
| Telecommunications |
EN300-386 |
| X-ray |
US DHHS 21 CFR Subchapter J, PTB German X-ray Decree |
| Dimensions
and Weights |
| Height1 |
71.4 cm (28.1 in.) with castors
70.0 cm (27.6 in.) without castors |
| Width |
48.0 cm (18.9 in.) |
| Depth |
83.6 cm (32.9 in.) |
| Weight |
88.0 kg (194.0 lb.)(minimum, approximate)
130.6 kg (288.0 lb.)(maximum, approximate) |
| Power Cord |
2.5 m (8.2 ft.) |
| 1 Rackmounting does
not require the removal of castors. |
| Clearance
and Service Access |
| Front |
Deskside - 91 cm (36 in.)
Rackmount - 122 cm (48 in.) |
| Rear |
91 cm (36 in.) |
| Right |
91 cm (36 in.) |
| Left |
91 cm (36 in.) |
| Clearance
For Proper Cooling |
| Front Blockage Only |
7.6 cm (3.0 in.) |
| Rear Blockage Only |
8.9 cm (3.5 in.) |
| Front And Rear Blockage |
Front Clearance: 8.9 cm (3.5 in.)
Rear Clearance: 10.2 cm (4.0 in.) |
| Rack
Mounting |
| Fits into Sun StorEdge 72" Expansion Rack, Sun Fire Cabinet and Sun Rack 900.
Third party racks that comply with the EIA-310-D-1992 Standard and that have a 34" (86.36 cm.) to 36"
(91.44 cm.) depth rail-to-rail may be considered. The X9628A-Z rackmount kit has adjustable extenders
which can accommodate rail-to-rail depths of 32" (81.28 cm.) to 36" (91.44 cm.) only and should be
appropriate for these EIA Standards compliant racks. Sufficient space for cable management must be
allowed. Therefore, third party cabinets with a total, externally measured depth of 36" and possibly
as much as 39" may be required. Front doors to cabinets must provide at least 60% open area and rear
doors at least 63% open area for the Sun Fire V890 to cool properly. Third-party products are neither
tested, endorsed nor recommended.
|
