Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun Fire[tm] X4440, RoHS:YL Server: Hardware Specifications

Processor
Number 2 or 4, Dual-Core or Quad-Core
Architecture Type: AMD Opteron
  • 1.9GHZ Quad-Core AMD Opteron 8347HE
  • 2.3GHz Quad-Core AMD Opteron 8356
  • 2.5GHz Quad-Core AMD Opteron 8360SE
  • 2.6GHz Dual-Core AMD Opteron 8218HE
  • 3.0GHz Dual-Core AMD Opteron 8222
  • 3.2GHz Dual-Core AMD Opteron 8224SE
  • 2.5GHz Quad-Core AMD Opteron 8380
  • 2.7GHz Quad-Core AMD Opteron 8384
  • 2.3GHz Quad-Core AMD Opteron 8376HE
  • 2.6GHz 6-Core AMD Opteron 8435, 75W
  • 2.4GHz 6-Core AMD Opteron 8431, 75W
Cache memory 1 MB Level 2 cache per processor core (Dual Core)
512 KB Level 2 cache per processor core (Quad Core)
Main Memory
Capacities DIMM slots per System: 32
DIMM type: DDR2 667MHz Registered DIMMs
DIMM size: 1-GB, 2-GB, 4-GB or 8-GB
Maximum capacity: 256GB (when configured with 8-GB DIMMs)
NOTE: For optimal performance, install DIMMs in matched pairs. DIMM fillers should be installed in all unoccupied DIMM slots.
Standard Integrated Interfaces
Network Four 10/100/1000 Base-T Ethernet Ports
Network Management One dedicated 10/100Base-T Ethernet port
Serial Management One dedicated TIA/EIA-232-F asynchronous RJ45 port
SAS Four channel SAS interface, internal or external with add-on SAS Host Bus Adapter
USB Front: Two USB 2.0 ports
Rear: Two USB 2.0 ports
Internal: One USB 2.0 port
PCI Expansion Slots Six internal MD2 low profile PCI Express slots
  • One PCIe x16 slot
  • Four PCIe x8 slot
  • One PCIe x4 slot (x8 mechanical)
Internal Mass Storage
Disks Up to eight 2.5" SAS internal hot-swap Disks

Drive Type
Density
Speed
Form Factor
SAS
73 GB
10,000 RPM
2.5"
SAS
73 GB
15,000 RPM
2.5"
SAS
146 GB
10,000 RPM
2.5"
SAS
300 GB
10,000 RPM
2.5"
Solid State Drives Up to eight 32GB solid state drives
Removable Media One EIDE DVD+/-RW drive (optional)
Power Supplies
Dual redundant, hot swappable power supplies
(Power supply rating DC output = 1050W)
(UL Maximum AC input = 12 Amps RMS at 100 VAC)
Environment
AC power 90-264 V AC (47-63 Hz)
Temperature Single, non-rack system:
Operating: 5° C to 35° C (41° F to 95° F)
Nonoperating: -40° C to 70° C (-40° F to 158° F)
Humidity Single, non-rack system:
Operating: 10% to 90% relative humidity noncondensing
Nonoperating: up to 93% relative humidity noncondensing
Altitude Single, non-rack system:
Operating: up to 3048 m (10,000 ft.), maximum ambient temperature is derated by 1° C per 300 m above 900 m
Nonoperating: up to 12,000 m (40,000 ft.)
Acoustic noise Single, non-rack system:
LwAd (1B=10dB)
     7.7 B (idle and operating)
LpAm bystander
     65.8 dB at max ambient
Regulations
Meets or exceeds the following requirements:
RoHS Compliance Level RoHS:YL
Safety IEC 60950, UL/CSA 60950-1, EN 60950, CB Scheme with all country differences
RFI/EMI FCC CFR 47 Part 15 Class A, EN 55022 Class A, EN 61000-3-2, EN 61000-3-3, EN300-386
Immunity EN55024, EN300-386
Certifications Safety: UL/cUL, UL DEMKO, CE, BSMI, CCC, GOST-R, S-Mark
EMC: CE, FCC, VCCI, ICES, C-Tick, MIC, CCC, GOST-R, BSMI Class A
Dimensions and Weight
Height 87.85 mm (3.46 in.)
Width 425.46 mm (16.75 in.)
Depth 711.25 mm (28 in.)
Weight 28.6 kg (63 lb.) maximum without rack kit
Rack Mounting
Optional Slide Rail Kit (X6324A)1is a 4-point mounted slide rail kit.
Sun Fire X4440 server racks (using the X6324A kit) Racks are as follows:
  • Sun Rack 938
  • Sun Rack 1038
  • Sun Rack 1042
  • Third Party EIA-310-D-19922
1 The slide kit includes hardware that enables mounting to any of the following types of rack rails:
  • 6 mm threaded holes
  • #10-32 threaded holes
  • #10 threaded holes
  •  Square unthereaded holes per EIA and IEC standards
2 These must be compliant racks which have mounting depths of 27-30 inches.

  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback