|
Part Number
|
Format
|
Title
|
Description |
|
n/a
|
|
Sun StorEdge T3 Array - Just the Facts (5/01) |
Contains much information about all aspects of
the StorEdge T3 array, from configuration, compatibility, to performance
and available options. |
|
n/a
|
|
Sun StorEdge T3 Array with 1-GB Cache Controller
(T3+) - Just the Facts (9/01) |
Contains much information about all aspects of
the StorEdge T3+ array, from configuration, compatibility, to performance
and available options. |
|
n/a
|
|
Storage Array Battery replacements and Radiance
support types |
Contains information on how to determine the correct
status of the battery in a a A1000, A3500, or T3 Storage Array. It will
also help in determining if the Radiance support type should be set to FCO,
Preventive Maintenance, or HW on-site. |
|
n/a
|
|
Configuration Rules for Mission Critical Storage |
Provides some general guidelines for configuring
storage platforms to match application requirements. These guidelines are
designed to help ensure high levels of availability first, good performance
second, and low cost last. |
|
n/a
|
|
Sun StorEdge T3 Array FAQs |
Frequently Asked Questions about the T3 array. |
|
n/a
|
|
Sun StorEdge T3 Array for the Enterprise with
Redundant Fibre Channel Switch Configurations - Just the Facts (2/01) |
Contains requirements and configuration information
for the Sun StorEdge T3 array with the redundant 8 port switch. |
|
n/a
|
|
Sun StorEdge T3 Array Multi-Platform Support
- Just the Facts (2/01) |
Contains requirements and configuration information
for the Sun StorEdge T3 array amd its use in a mulit-platform environment. |
|
n/a
|
|
Brocade SAN Configuration Descriptions (2/01) |
SAN configuration rules and examples for the StorEdge
Network FC Switch-8 and StorEdge Network FC Switch-16. |
|
n/a
|
|
SOC+XT SAN Limited Program Overview and Purpose |
The purpose of the SOC+XT SAN Program is to allow
existing SBus servers to attach SAN storage devices in a controlled environment.
The focus of this program has been limited to those customers who are unable
not unwilling to migrate to Solaris 8/beyond. SunPS approval is required
on all SOC+XT configurations. SUN INTERNAL ONLY |
|
n/a
|
|
Sun StorEdge Network FC Switch-8 and Switch-16
- Just the Facts (9/01) |
Contains much information about the Sun StorEdge
Network FC Switch-8 and Switch-16. |
| |
|
805-4748
|
|
Rackmount Placement Matrix |
Contains hole assignments for Sun products that
can be mounted in system or expansion cabinet racks. |
| |
|
806-1495
|
|
Sun StorEdge T3 Disk Tray Installation Task
map |
An overview of some of the steps needed to install
a Sun StorEdge T3 disk array, with references to most of the other documents
listed on this page. |
|
806-1497
|
|
Sun StorEdge T3 Disk Tray Release Notes (Version
1.17a Controller Firmware) |
Contains information that was not available at
the time the product documentation for the Sun StorEdge T3 disk array was
published. |
|
806-4210
|
|
Sun StorEdge T3 Disk Tray Configuration Guide |
Describes the recommended configurations for the
Sun StorEdge T3 disk tray for high availability, the maximum performance,
and maximum storage capability. This guide is intended for Sun field sales
and technical support personnel. |
|
806-5133
|
|
Sun StorEdge T3 and T3+ Array Telco Rack Installation
Guide |
Describes how to install a Sun StorEdge T3 and
T3+ array in a telco rack using the telco rackmount kit. |
|
806-5341
|
|
1 RU Air Baffle Installation Guide for the Sun
Enterprise[tm] 6500/5500 System Cabinet |
When installing a T3 Disk Array in a Sun Enterprise
6500/5500 System Cabinet, it is required to install a 1 RU Air Baffle to
maintain the cooling levels for the cabinet environment. |
|
806-6924
|
|
Sun StorEdge network FC switch-8 and switch-16
Release Notes |
Describes both hardware and software installation
notes and product considerations for the Sun StorEdge network FC switches
and Sun StorEdge network FC 2.1 software. |
|
806-7979
|
|
Sun StorEdge T3 Disk Tray Cabinet Installation
Guide |
Describes how to install a Sun StorEdge T3 disk tray in a Sun cabinet
or a standard 19-inch EIA/RETMA cabinet using a rackmount kit. There are
two types of rackmount kits available:
- 4 rack units (RU) high (fits one disk tray).
- 7 RUs high (fits two disk trays).
|
| |
|
816-0772
|
|
Sun StorEdge T3 and T3+ Array Start Here - Installation
Overview and Documentation Guide |
Provides reference to useful documents and information
about preparation, installation, and configuration of Sun StorEdge T3 and
T3+ Arrays. |
|
816-0773
|
|
Sun StorEdge T3 and T3+ Array Installation,
Operation, and Service Manual |
Describes features, hardware components, supported
configurations, installation information and procedures for replacing hardware
components of the Sun StorEdge T3 and T3+ Arrays. |
|
816-0774
|
|
Sun StorEdge T3 and T3+ Array Regulatory and
Safety Compliance Manual |
Provides safety precautions to follow when setting
up a Sun StorEdge T3 or T3+ Array. |
|
816-0776
|
|
Sun StorEdge T3 and T3+ Array Administrator's
Guide |
This book provides information on using the command-line
interface (CLI) of the Sun StorEdge T3 and T3+ array for administrative
tasks. Each chapter contains a list of the CLI commands as they pertain
to performing various tasks related to configuring, monitoring or troubleshooting
an array. |
|
816-0777
|
|
Sun StorEdge T3 and T3+ Array Configuration
Guide |
Describes the recommended configurations for the
Sun StorEdge T3 and T3+ disk tray for high availability, the maximum performance
and maximum storage capability. |
|
816-0778
|
|
Sun StorEdge T3 and T3+ Array Site Preparation
Guide |
The Sun StorEdge T3 and T3+ Array Site Preparation
Guide provides information on preparing a customer site for installation
of a Sun StorEdge T3 or T3+ array, or an array rack system. This guide is
intended for Sun field sales and technical support personnel. |
|
816-0780
|
|
Sun StorEdge T3 Array Controller Upgrade Manual |
Contains instructions for upgrading the Sun StorEdge
T3 array to a Sun StorEdge T3+ array. |
|
816-0781
|
|
Sun StorEdge T3 and T3+ Array Release Notes
Online |
The latest release notes for the Sun StorEdge T3 and T3+ arrays, and
other array documents, are now available on the web.
Refer to the Sun StorEdge T3 and T3+ Array Start Here document that is
shipped with the array for an installation overview and guide to all array
documentation.
|
|
816-0830
|
|
Sun StorEdge Network FC Switch-8 and Switch-16
Installation and Configuration Guide |
The Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration
Guide describes how to set up the Sun StorEdge Network FC Switch-8 and
Switch -16 hardware and configure it to the network. It provides information
and pointers to additional documentation you may need for configuring,
troubleshooting, and using the switch. The book is intended for technical
users who have experience with storage systems. Older versions of this
document:  806-2877
, 806-6922
|
|
816-0842
|
|
Sun StorEdge Network FC Switch-8 and Switch-16
Release Notes - SunStorEdge SAN 3.0 Release |
Describes both hardware and software installation notes and
product considerations for the Sun StorEdge network FC switches and Sun
StorEdge SAN 3.0 release software. |
|
816-1179
|
|
StorTools[tm] 4.1 User's Guide |
The StorTools 4.1 User s Guide describes the StorTools 4.1
diagnostic package, which provides diagnostics for the following Sun products:
- Sun StorEdge A5x00 array
- Sun StorEdge A3500FC disk tray
- Sun StorEdge T3 array
- Internal Fibre Channel disk
- Sun StorEdge Network FC Switch-8 and Switch-16
This document describes the Sun StorEdge StorTools graphical user interface
(GUI) and command-line utilities and provides procedures for using the tools.
This guide is written for system administrators and support personnel who
are already familiar with Sun s disk array products. This diagnostic toolkit
is for use only by Sun internal and Sun authorized service providers trained
on the toolkit and on the product for which it was intended.
|
|
816-1471
|
|
Multi-Platform Sun StorEdge Network FC Switch-8
and Switch-16 Guide |
Provides guidelines for use of the Sun StorEdge
network FC switch-8 and switch-16 in third party operating environments. |
|
816-1701
|
|
Sun StorEdge Network FC Switch-8 and Switch-16
Field Troubleshooting Guide Sun StorEdge - SAN 3.1 Release |
Describes how to diagnose and troubleshoot the
Sun StorEdge network FC switch-8 and switch-16 hardware. It provides information
and pointers to additional documentation you may need for installing, configuring,
and using the configuration. The book is primarily intended for use by experienced
system support engineers who already have a good understanding of the product.
Older versions of this document: 806-5514
, 806-6923 , 816-0252 |
|
816-1983
|
|
Sun StorEdge T3+ Array Releases Notes - Version
2.0 Controller Firmware |
This document contains late-breaking product information
and known issues that are specific to the Sun StorEdge T3+ array. Issues
documented previously for the Sun StorEdge T3 array model that do not appear
in these release notes have either been resolved or do not apply to the
Sun StorEdge T3+ array. |
|
816-1986
|
|
Sun StorEdge Network FC Switch-8 and Switch-16
Operations Guide - Switch 3.0 |
Contains information for administrators who encounter
trouble in setting up their configurations. It provides information on how
to replace a switch in the fabric. |
|
816-2686
|
|
StorTools[tm] 4.2 Reference Manual |
Describes the StorTools 4.2 diagnostic package, which provides diagnostics
for the following Sun products:
- Sun StorEdge A5x00 array
- Sun Fire 880 workgroup server
- Sun StorEdge A3500FC disk tray
- Sun StorEdge T3 array
- Internal Fibre Channel disk
- Sun StorEdge Network FC Switch-8 and Switch-16
This document describes the Sun StorEdge StorTools graphical user interface
(GUI) and command-line utilities and provides procedures for using the tools.
This guide is written for system administrators and support personnel who
are already familiar with Sun s disk array products. |
|
816-2688
|
|
Sun StorEdge Network FC Switch-8 and Switch-16 Best Practices
- Sun StorEdge SAN 3.0 Release |
To facilitate optimum performance in current configurations
and to set up your Sun StorEdge Network FC Switch-8 and Switch-16 Version
3.0 software to allow additional features and increased functionality in
supported subsequent releases, follow the configuration rules in the Configuration
chapter of the Sun StorEdge
Network FC Switch-8 and Switch-16 (Version 3.0) Configuration and Installation
Guide. |
|
816-2953
|
|
Sun StorEdge SAN Customer Troubleshooting Guide Release
3.1 |
Provides guidance for locating and troubleshooting problems
for the Sun StorEdge network F C switches and Brocade Silkworm Fibre Channel
switches. |
|
816-3644
|
|
Sun StorEdge Remote Response - Field Installation Guide |
Provides installation instructions for Remote Response X-Option
Kit components. |
|
816-3652
|
|
Sun StorEdge Network FC Switch-8 and Switch-16 Configuration
Supplement for SAN 3.1 Disaster Tolerance Configurations |
The rules for the Sun StorEdge Network FC Switch-8 and Switch-16
Sun SAN 3.0 have been extended to support additional configurations for
disaster recovery scenarios. This document lists the modifications to the
configuration ru les in the Sun StorEdge Network FC Switch-8 and Switch-16
Sun Installation and Configuration Guide: Sun StorEdge SAN 3.0 Re lease.
It also provides illustrative examples to show use of the extended rules. |
|
816-4106
|
|
Sun StorEdge T3+ Array Release Notes - Version 2.0.1 Controller
Firmware |
Contains late-breaking product information and known issues
that are specific to the Sun StorEdge T3+ array. Issues documented previously
for the Sun StorEdge T3 array model that do not appear in these release
notes have either been resolved or do not apply to the Sun StorEdge T3+
array. |
|
816-4107
|
|
Sun StorEdge T3 Array Release Notes - Version 1.18 Controller
Firmware |
Contains important information about the Sun StorEdge T3 array
controller firmware version 1.18 such as required patches and issues that
may be related. |
|
816-4294
|
|
Sun StorEdge Configuration Service 1.0 Installation Guide |
Provides instructions for installing and uninstalling the Sun
StorEdge Configuration Service software. |
|
816-4295
|
|
Sun StorEdge Configuration Service 1.0 Administrator's Guide |
Provides procedures for configuring and managing storage with
the Sun StorEdge Configuration Service software. |
|
816-4296
|
|
Sun StorEdge Configuration Service 1.0 Release Notes |
Contains the latest supplementary information. Use it with
the latest version of the Sun
StorEdge Configuration Service 1.0 Installation Guide (816-4294). |
|
816-4768
|
|
Sun StorEdge T3+ Array Start Here - Installation Overview
and Documentation Guide |
Provides an overview of setting up a T3+ array and also provides
a list of documentation references. |
|
816-4769
|
|
Sun StorEdge T3+ Array Installation and Configuration Manual
- Version 2.1 Controller Firmware |
Contains information on how to install, operate, and service
the Sun StorEdge T3+ array. Most of the procedures in this manual can be
performed by an experienced system administrator. |
|
816-4770
|
|
Sun StorEdge T3+ Array Administrator's Manual, Version 2.1
Controller Firmware |
Describes how to configure, monitor, and troubleshoot Sun StorEdge
T3+ arrays using the command-line interface (CLI). It provides information
on commands that are specific to the array, but it is not intended as a
reference for general operating system commands. This guide is designed
for use with the Sun StorEdge T3+ Array Installation and Configuration Manual
and is written for an experienced system administrator of the Solaris[tm]
operating environment and related disk storage systems. |
|
816-4774
|
|
Sun StorEdge T3 and T3+ Array Field Service Manual |
Provides the qualified service-trained maintenance provider
with sufficient information to effectively troubleshoot and resolve any
Sun StorEdge T3+ array failure. The procedures in this manual describe how
to isolate the failure, remove and replace component(s), effectively reconfigure
the module and system, and place the product back into the customer's network.
Older version of this document: 816-0779 |
|
816-5324
|
|
Storage Automated Diagnostic Environment User's Guide Version
2.1 |
Describes how to use the Storage Automated Diagnostic Environment
graphical user interface (GUI) to collect data about the condition of various
storage devices. |
|
816-7771
|
|
Sun StorEdge T3 Disk Tray Installation Guide For the Sun
Rack |
Provides information on installing a StorEdge T3 array into
a Sun Rack 900. |
| |
|
817-4676
|
|
Sun StorEdge T3+ Array Release Notes - Version 3.2.3 Controller Firmware |
Contains late-breaking product information and known issues that are specific to the Sun StorEdge" T3+ array (also known as Sun StorEdge T3 array with 1GB Cache Controller).
|
| |
|
819-0051
|
|
Disk Scrubbing Sun StorEdge Arrays
| Provides an overview of disk scrubbing in general as well as a description of Sun s implementation of disk scrubbing. In addition, this paper describes various types of disk drive failures and shows how the disk scrubber can reduce the likelihood of such failures. Finally, for those readers who need a quick refresh, Appendix B provides high-level overview of RAID. The Sun StorEdge Disk Scrubber checks the integrity of an array's media. For the storage pools configured on these arrays, it also checks the RAID parity data. The disk scrubber continuously scans disk drives for media errors. When an error is detected, it reports the problem and attempts to fix it. |
