|
|
| Number |
Up to two |
| Architecture |
300-, 360-, or 450-MHz UltraSPARC[tm]-II |
| Memory management |
MMU with 64 I-TLB entries and 64 D-TLB entries, 8192
hardware-supported contexts |
| Cache memory |
16-KB data and 16-KB instruction on chip
4-MB external (2-MB for 300-MHz)
|
| UPA Speed |
112.5 MHz |
|
|
| Capacities |
16 DIMM module slots
Install SIMMs in sets of four. 16-, 32-, 64-, and 128-MB DIMM expansion
2 GB total memory capacity
|
| Memory type |
60-ns memory modules |
| Datapath |
576 bits wide |
|
|
| Audio |
Four audio ports: headphone(out), line-in, line-out
and microphone(in) using EIA standard 0.125-inch
(3.5-mm) jacks |
| Ethernet |
One ethernet/fast ethernet (10BASE-T/100BASE-T) twisted-pair
standard connector (RJ-45)
or one MII for external
transceiver connection |
| Keyboard and mouse |
One standard keyboard/mouse port (mini
DIN-8) |
| Parallel |
One Centronics-compatible parallel port (DB25);
ECP mode capable |
| PCI |
Four full-size PCI slots compliant with PCI specification
version 2.1:
- Three slots operating at 33-MHz, 32- or 64-bit data bus width, 5 volt
- One slot operating at 33- or 66-MHz, 32- or 64-bit data bus width,
3.3 volt
|
| SCSI |
One 40-MB/sec, 68-pin,
UltraSCSI (SCSI-3) (synchronous), 2 channels |
| Serial |
Two RS-232C/RS-423 serial ports (DB25) |
| UPA graphics slot |
Two UPA graphics slots supporting up to two Sun[tm]
Creator3D or Sun Elite3D m3, or one Elite3D m6 and one Creator3D or Elite3D
m3 or Sun Expert3D |
|
|
| Disks |
Up to two 3.5-x 1-in or x 1.6-in. disks; 4.2-GB, 9.1-GB,
18.2-GB, or 36.4-GB |
| Floppy |
Optional 3.5-in. MS-DOS/IBM compatible (720 KB, 1.2
MB, 1.44 MB formatted) |
| CD-ROM/DVD-ROM |
SunCD[tm] 4x, 12x, or 32x 644-MB SCSI CD-ROM
10X DVD-ROM
|
| Tape |
Optional:
- 20-to 40-GB 4 mm DDS-4
- 12-to 24-GB 4mm DDS-3
- 7-to 14-GB 8-mm
- 4-to 8-GB 1/4" SLR
- 4-to 8-GB 4 mm DDS-2
|
|
|
| AC input |
100 - 240 VAC, 47 - 63 Hz, 4 A (max), 0.4 K VA |
| Input power |
350 W |
| Heat output |
1194 BTU/hr |
| Temperature |
Operating: 10° C to 40° C (50° F
to 104° F) without tape drive; 10° C to 35° C (50° F to
95° F) with tape drive
Nonoperating: -20 °C to 60 °C ( -4 °F to 140 °F) |
| Humidity |
Operating: 20% to 80% relative humidity, noncondensing
Nonoperating: 5% to 93% relative humidity, noncondensing |
| Altitude |
Operating: 3000 m (10,000 ft)
Nonoperating: 12,000 m (40,000 ft) |
| Acoustic noise |
Operating: 6.1 bels
Nonoperating: 5.9 bels |
| Vibration |
Operating: 0.2G, 5 to 500 to 5 Hz (5 sweeps),
3 perpendicular axes
Nonoperating: 1.0G, 5 to 500 to 5 Hz (5 sweeps), 3 perpendicular
axes |
| Shock |
Operating: 5.0G, 11 milliseconds, half sine pulse
Nonoperating: 30G peak, 11 milliseconds, half sine pulse |
| Number of cords |
1 |
Regulations
Meets or exceeds the following requirements:
|
| Safety |
UL 1950, CSA C22.2 No. 950, TUV EN 60950, CB Scheme Sun Elite3D Graphics
with Nordic deviations, EMKO-TSE (74-SEC) 203, ZH1/618 |
| RFI/EMI |
FCC Class B, DOC Class B, VCCI Class 2, EN 55022 Class B, EN 61000-3-2 |
| Immunity |
EN 50082-1 |
| X-ray |
DHHS 21 Subchapter J; PTB German X-ray Decree |
| Power management |
Energy Star compliant |
|
|
| Height |
45.0 cm (17.7 in.) |
| Width |
19.0 cm (7.5 in.) |
| Depth |
49.8 cm (19.6 in.) |
| Weight |
22.65 kg (50 lb.) |
