| Processor |
| Number |
One
The processor communicates with the system I/O through the 167MHz Jbus interface. |
| Architecture |
1.34GHz UltraSPARC IIIi:
|
| Cache memory |
1MB Level 2 |
| Main
Memory |
| Capacities |
Characteristics of the DDR-1 ECC-protected memory include:
- Maximum system memory - 8GB (using 2GB DIMMS)
- Maximum DIMMS - 4 (8GB max)
- Maximum DIMM slots - 4
- Two physical banks of two DIMMs
- DIMM sizes offered - 512MB, 1GB, or 2GB
- DDR-1 registered ECC memory at 266 MHz
- Processor accesses memory across the 128-bit data bus. Must be installed in pairs.
|
| Standard
Interfaces |
| Audio |
Four AC97 ports as follows:
|
| Ethernet |
Two 10/100/1000 BaseT (Gigabit) ethernet ports (rear of workstation) |
| Expansion Slots |
Five slots as follows:
- Two PCI-Express: both mechanical (x16) and electrically (x8)
- One PCI-Express mechanical (x8) and electrically (x4)
- Two PCI-X 100MHz/64 bit slots
|
| Serial |
Two ports (rear of workstation) |
| USB |
Six ports as follows:
- Two USB 2.0 ports in front
- Four USB 2.0 ports in rear
|
| Internal
Storage |
| Disks |
Allows a maximum of four internal 3.5" SAS (146GB - 15000 RPM) or SATA (80GB or 250GB - 7200 RPM) disk drives.
Drives are supported by an integrated PCI-X SAS/SATA disk controller.
|
| Optical Disk Drives |
Optical disk drive as follows:
- One 8x DVD-RW/24x CD-RW (Slot-loading)
- ATAPI - Interface
Note: Systems that ship without an optical disk drive require an optical disk drive EMI filler panel in the
unoccupied bay to cover the slot opening.
|
| Graphics |
| Cards |
Note: Solaris 10 currently does not support dual graphics cards, each driving a monitor.
|
| Environment |
| AC Power |
Voltage: 110-127/200-240 VAC
Frequency: 50-60 Hz, 10/6 Amps |
| Input Current |
6.4 amps @ 100 VAC, 3.2 amps @ 200 VAC
|
| Power consumption |
Power Supply - 1000 Watts (maximum) |
| Temperature |
Operating: 2° C to 35° C (41° F to 95° F) at 3000 meters
Nonoperating:-40° C to 68° C (-40° F to 158° F) at 12000 meters |
| Humidity |
Operating: 7% to 93% relative humidity, non-condensing
Nonoperating: 93% relative humidity, non-condensing
|
| Acoustic noise |
Operating:LWAd (1B=10db) 5.0 B
LpAm (by standard position) 42 dBA
Idling: LWAd (1B=10db) 4.5 B
LpAm (by standard position) 38 dBA
|
| Shock |
Operating: 5 G's, 11 msec, half-sine
Nonoperating: 30 G's, 11 msec, half-sine
|
| Regulations |
| Meets or exceeds the following requirements: |
| RoHS Compliance Level |
RoHS:Y |
| Safety |
IEC60950 CB, UL/CSA-60950, EN60950 |
| RFI/EMC |
Class B, FCC CFR47, part 15 Class B; EN 6100-3-2, EN 61000-3-3 |
| Immunity |
EN55024 All applicable levels |
| Regulatory Markings |
UL/cUL, TUV-GS, CE FCC, VCCI, ICES-003, CCC, C-tick, GOST-R, MIC, S-Mark, EEE, BSMI
|
| Ergonomics |
EK1-1TB-2000, RFI/EMC, EN 55022/CISPR22 |
| Power Management |
EPA MOU 3 (Supports PowerNow standard ACPI power states for Windows) |
| Dimensions
and Weights |
| Height |
445 mm (17.5 in) |
| Width |
205 mm (8.1 in) |
| Depth |
569 mm (22.4 in) |
| Weight |
26.31 kg (58 lbs) fully configured depending on configuration |
