Asset ID: |
1-72-1002596.1 |
Update Date: | 2010-07-06 |
Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1002596.1
:
Sun Fire[TM] V1280 - "prtdiag" might not show environmental output for a new System Board
Related Categories |
- GCS>Sun Microsystems>Servers>Midrange V and Netra Servers
|
PreviouslyPublishedAs
203589
SymptomsWhen a CPU/memory board is newly installed, the system may not show correct SB and environment information (eg. Temperature/Fan data) in "prtdiag" output correctly.
In this example situation below, SB4 is newly installed into a Sun Fire[TM] V1280 system after a normal boot. The following is the prtdiag output.
% prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Fire V1280
System clock frequency: 150 MHZ
Memory size: 24GB
CPUs
E$ CPU CPU Temperature Fan CPU Freq Size Impl. Mask Die Ambient Speed Unit
--- -------- ---------- ------ ---- -------- -------- ----- ----
SB0/P0 1200 MHz 8MB US-III+ 11.0 43 C 24 C
SB0/P1 1200 MHz 8MB US-III+ 11.0 42 C 24 C
SB0/P2 1200 MHz 8MB US-III+ 11.0 42 C 24 C
SB0/P3 1200 MHz 8MB US-III+ 11.0 41 C 25 C
SB2/P0 1200 MHz 8MB US-III+ 11.0 40 C 23 C
SB2/P1 1200 MHz 8MB US-III+ 11.0 41 C 23 C
SB2/P2 1200 MHz 8MB US-III+ 11.0 42 C 23 C
SB2/P3 1200 MHz 8MB US-III+ 11.0 41 C 23 C
16 1200 MHz 8MB US-III+ 11.1 - - <- HERE !!!
17 1200 MHz 8MB US-III+ 11.1 - - <- HERE !!!
18 1200 MHz 8MB US-III+ 11.1 - - <- HERE !!!
19 1200 MHz 8MB US-III+ 11.1 - - <- HERE !!!
IO Devices
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ---------------------------- --------------------
0 pci 33 PCI0 pci108e,abba (network) SUNW,pci-ce
0 pci 33 PCI1 pci108e,abba (network) SUNW,pci-ce
0 pci 33 PCI2 scsi-pci1000,f (scsi-2)
0 pci 33 PCI2 scsi-pci1000,f (scsi-2)
0 pci 33 PCI3 lpfc-pci10df,f900 (scsi) LP9002
0 pci 33 PCI4 lpfc-pci10df,f900 (scsi) LP9002
0 pci 66 1 pci108e,abba (network) SUNW,pci-ce
0 pci 66 2 scsi-pci1000,21 (scsi-2)
0 pci 66 2 scsi-pci1000,21 (scsi-2)
0 pci 66 2 pci108e,abba (network) SUNW,pci-ce
0 pci 33 3 pci1095,646 (ide)
0 pci 33 4 bootbus-controller-sgsbbc SUNW,sgsbbc
ResolutionResolution
The workaround for this situation is to shutdown the system and reconfigure-boot the system (
boot -r).
It is also recommended to make sure the picl patch is updated (see Patch ID 111792 ) on the system in question.
NOTE: This issue was reported on Solaris 8 and ScApp 5.18.x, but it is not thought to occur on any other configuration.
ProductSun Fire V1280 Server
Internal Comments
For internal Sun use only.
Refer to Bug ID 5102782
prtdiag, SB, system board, environment, temperature, failed, boot -r, picl
Previously Published As
85710
Attachments
This solution has no attachment