Asset ID:	1-72-1011864.1
Update Date:	2010-10-28
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  1011864.1 :   Sun StorEdge[TM] D1000 disk drive LED's flashing amber / green continuously  


PreviouslyPublishedAs
216248

Symptoms
All the disk drives in a D1000 disk array have their LED's flashing amber and green continuously.

No other disk problems or errors are evident and performance seems normal.



Resolution
If SunVTS[TM] is run against a machine or domain with a D1000 disk array attached, the D1000 array may be left in such a state that the disk LED's flash amber and green continuously.
There are no other adverse effects, but the D1000 array must then be power cycled to clear this condition.

This is due to the SES driver being left in an unknown state by SunVTS after the diagnostic tests are aborted.

Note: If the D1000 is configured in a split bus configuration and connected to two different hosts, only the disks attached to the host that ran SunVTS will have flashing amber / green LED's.

Product
Sun StorageTek D1000 Array

Internal Comments
For internal Sun use only.

michael.buckley@sun.com

D1000, LED, flashing, amber, SunVTS, disk
Previously Published As
48028

Change History
Date: 2005-02-10
User Name: 31620
Action: Approved
Comment: Verified Metadata
Verified still correct for audience - free
Checked review date 2006-02-09
Checked for TM - no new ones needed
Publishing
Version: 3
Date: 2005-02-10
User Name: 31620
Action: Accept
Comment:
Version: 0
Date: 2005-02-09
User Name: 18335
Action: Approved
Comment: Looks fine.
Version: 0
Product_uuid
2a753f90-0a18-11d6-96d0-f5e96014c515|Sun StorageTek D1000 Array

Attachments

This solution has no attachment