Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Problem Resolution Sure Solution 1012604.1 : mpt driver fails to attach to PCI-X Dual Ultra-320 SCSI HBA (Jasper320) on a Sun Fire[TM] E2900/V1280
PreviouslyPublishedAs 217346 Symptoms With firmware revision 5.19.0-4 and also 5.18.3, if POST is run with "diag-level" set to "max" in OBP and/or "bootmode" is set to "diag" in "lom" with a Jasper320 HBA (pn# 375-3191) installed in the system, the HBA would not get recognised in OBP, thus failing to load the "mpt" driver during Solaris bootup. Resolution A fix is availabe with patch 114526-06 firmware 5.19.5 or higher release and with patch 114527-01 firmware 5.20.0 or higher release. Additional Information Following errors are seen during Solaris[TM] bootup : Sep 14 10:18:20 ct41-c1-1 mpt: [ID 576234 kern.warning] WARNING: ID[SUNWpd.mpt.attach.4011] Sep 14 10:18:25 ct41-c1-1 genunix: [ID 408789 kern.warning] WARNING: mpt3: fault detected in device; service unavailable Sep 14 10:18:25 ct41-c1-1 genunix: [ID 451854 kern.warning] WARNING: mpt3: firmware load failed Sep 14 10:18:25 ct41-c1-1 genunix: [ID 408822 kern.info] mpt3: fault detected in device; service still unavailable Sep 14 10:18:25 ct41-c1-1 genunix: [ID 611667 kern.info] mpt3: hard reset failed Sep 14 10:18:25 ct41-c1-1 genunix: [ID 408822 kern.info] mpt3: fault detected in device; service still unavailable Sep 14 10:18:25 ct41-c1-1 genunix: [ID 611667 kern.info] mpt3: mpt ioc initialization failed Sep 14 10:18:25 ct41-c1-1 0x09attach failed Sep 14 10:18:25 ct41-c1-1 mpt: [ID 576234 kern.warning] WARNING: ID[SUNWpd.mpt.attach.4011] Sep 14 10:19:19 ct41-c1-1 genunix: [ID 408822 kern.info] mpt2: fault detected in device; service still unavailable Sep 14 10:19:19 ct41-c1-1 genunix: [ID 611667 kern.info] mpt2: firmware load failed Sep 14 10:19:19 ct41-c1-1 genunix: [ID 408822 kern.info] mpt2: fault detected in device; service still unavailable Sep 14 10:19:19 ct41-c1-1 genunix: [ID 611667 kern.info] mpt2: hard reset failed Sep 14 10:19:19 ct41-c1-1 genunix: [ID 408822 kern.info] mpt2: fault detected in device; service still unavailable Sep 14 10:19:19 ct41-c1-1 genunix: [ID 611667 kern.info] mpt2: mpt ioc initialization failed Sep 14 10:19:19 ct41-c1-1 0x09attach failed Sep 14 10:19:19 ct41-c1-1 mpt: [ID 576234 kern.warning] WARNING: ID[SUNWpd.mpt.attach.4011] Sep 14 10:19:59 ct41-c1-1 genunix: [ID 408822 kern.info] mpt3: fault detected in device; service still unavailable Sep 14 10:19:59 ct41-c1-1 genunix: [ID 611667 kern.info] mpt3: firmware load failed Sep 14 10:19:59 ct41-c1-1 genunix: [ID 408822 kern.info] mpt3: fault detected in device; service still unavailable Sep 14 10:19:59 ct41-c1-1 genunix: [ID 611667 kern.info] mpt3: hard reset failed Sep 14 10:19:59 ct41-c1-1 genunix: [ID 408822 kern.info] mpt3: fault detected in device; service still unavailable Sep 14 10:19:59 ct41-c1-1 genunix: [ID 611667 kern.info] mpt3: mpt ioc initialization failed Sep 14 10:19:59 ct41-c1-1 0x09attach failed When probe-scsi-all is run at the ok prompt, following messages are seen : {0} ok probe-scsi-all /ssm@0,0/pci@19,700000/scsi@3,1 <-----Failed ERROR: LSI1030: Reset Error. IOC State Not Ready. Can't open SCSI host adapter /ssm@0,0/pci@19,700000/scsi@3 ERROR: LSI1030: Reset Error. IOC State Not Ready. Can't open SCSI host adapter Product Sun Fire V1280 Server Sun Fire E2900 Server Internal Comments See: Bug ID <SUNBUG: 6329943>
The fix is available in 5.19.5 and 5.20.0. Additional details are documented in the bug for recovering this failure at the "ok" prompt using OBP/Forth commands Audited/updated 11/24/09 - roberto.morandi@Sun.COM, Mid-Range Server Content Team jasper320, jasper, lw8, mpt, LSI1030, Reset, probe-scsi-all, e2900, v1280 Previously Published As 82871 Change History Date: 2007-02-13 User Name: 7058 Action: Approved Comment: Updates OK to publish. No further edits needed. Version: 14 Attachments This solution has no attachment |
||||||||||||
|