Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Problem Resolution Sure Solution 1018081.1 : Installing Solaris[TM] 2.5.1 11/97 or Solaris 2.6[TM] HW 5/98 on selected hardware fails with hme0:link down or keyboard input repeats.
PreviouslyPublishedAs 229393 Symptoms Installing Solaris[TM] 2.5.1 11/97 or Solaris 2.6[TM] 5/98 on Ultra 5, 10, 60, 80, E220r, or E420r with 440 or 450 Mhz CPUs, whether interactively using a CDROM or doing a Jumpstart[TM] install will fail with the message "hme0 - link down". Another failure symptom is multiple keyboard input repeats, or repeating keystrokes. To prevent this, the Operating Environment Installation CD p/n 704-6914-10 (Sept 99) or 704-7076-10 (Feb 2000) must be used. Complete procedures are documented in the manual(s) 804-6657-11(Sept 99) or 806-4005-10 (Feb 2000) "Installing Solaris 2.5.1 or Solaris 2.6 Software on 419+ MHz Systems" or "Installing Solaris[TM] Software for Selected Hardware". Look for the OECD and documentation in the shrink wrapped packet that says "Binary Code License" or inside front cover of "Installing Solaris Software for Selected Hardware" manual. Resolution Interactive Installations and JumpStart installations are discussed below. Interactive Installation: The basic procedure to do a CDROM installation is: ok boot cdrom (using the Operating Environment Installation CD) The OE CD will prompt for information, then automatically eject and ask for the Solaris[TM] Software CD (2.6 5/98 or 2.5.1 11/97) to be inserted. Notes: Only initial installs are supported. A "boot cdrom" using the OE CD will erase all information on the hard drive. The OE CD contents are copied into the swap slice of the disk. The Ultra[TM] then reboots from the swap slice. When the install is completed, root will be slice 0 but the starting cylinder will NOT be 0. If the Ultra machine needs to "boot cdrom -s" for a troubleshooting procedure, use the OE CD or a Solaris[TM] 7 Software CD. A "boot cdrom -s" using the OE CD will NOT erase the information on the disk. For detailed output, see the section below, "What a cdrom installation looks like". Jumpstart[TM] Installation: Use the Operating Environment Installation CD's modify_install_server script to modify the Solaris jumpstart "image". Put the OE CD in the Jumpstart install or boot server's CDROM drive and: NOTE: If a separate boot server exists, modify_install_server must be run on BOTH the boot and the install server #cd /cdrom/cdrom/s0 # ./modify_install_server -r 2.6 -d /export/Install/2.6_598 or # ./modify_install_server -r 2.5.1 -d /export/Install/2.5.1_1197 Notes: It is necessary to use the OE CD p/n 704-7076-10 revision to support a Jumpstart install. -10 revision or greater is needed. The modified Jumpstart "image" will still support other architectures and CPU speeds. For detailed output, see the section below, "What modify_install_server looks like". The OE CD will also install the packages needed to support the Sun[TM] Elite 3D (AFB) or PGX32[TM] frame buffer, also known as the "Raptor" card. Reference Problem Resolution <Document: 1003009.1>. If Solaris 2.5.1 11/97 or Solaris 2.6 5/98 is already installed and the higher speed CPUs are being installed, be sure to install the latest kernel patches prior to the CPU installations. The minimum kernel patch revisions for the 440/450 Mhz CPUs are: Solaris 2.5.1 11/97 >= 103640-24 Solaris 2.6 5/98 >= 105181-10 Problem Symptoms Booting with a Solaris 2.6 5/98 or 2.5.1 11/97 CD: The Ultra machines will have the following problem symptoms if booted directly from a Solaris 2.6 5/98 or 2.5.1 11/97 CD: ok boot cdrom (using Solaris 2.6 5/98 CD) "hme0 link down" (Sometimes this message is repeated continually) Other times, the message is seen only once and the install progresses as expected but at reboot, keyboard input will echo. For example, when prompted for Power Management configuration and input an n for No - multiple n's are input like this: nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ======================================= What a cdrom installation looks like: (look for <====== to see notable items) ======================================= ok boot cdrom (using the Operating Environment Installation CD) Resetting ... Sun Ultra[TM] 5/10 UPA/PCI (UltraSPARC-IIi 440MHz), No Keyboard OpenBoot[TM] 3.19, 512 MB (60 ns) memory installed, Serial #11564742. Ethernet address 8:0:20:b0:76:c6, Host ID: 80b076c6. Rebooting with command: boot cdrom Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args: SunOS Release 5.7 Version Generic [UNIX(R) System V Release 4.0] Copyright (c) 1983-1998, Sun[TM] Microsystems, Inc. Solaris Web Start 3.0 installer The Solaris Installer can be run in English, or any of the following languages: 1) English 6) Japanese 2) German 7) Korean 3) Spanish 8) Swedish 4) French 9) Simplified_Chinese 5) Italian 10) Traditional_Chinese Select the language you want to use to run the installer: 1 <cr> Solaris installer is searching the system's hard disks for a location to place the Solaris installer software. This system appears to contain a version of Solaris. The Solaris installer does not allow upgrading. If you choose to use this installer an initial install will be required. Any information on your system's disks could be erased. Would you like to use this installer? [y,n,?] y The default root disk is /dev/dsk/c0t0d0. The Solaris installer needs to format /dev/dsk/c0t0d0 to install Solaris. WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED! <====== Do you want to format /dev/dsk/c0t0d0? [y,n,?,q] n <cr>(ide disks don't format) The following disks were found on your system. 1) /dev/dsk/c0t0d0 2) Quit Select a disk to place the Solaris installer software, or select 2 to exit the installer. WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED! Please make a selection. >1 <cr> Enter a swap partition size between 320Mb and 8692Mb, default = 512Mb [?]<cr><====== You have selected /dev/dsk/c0t0d0 with a swap size of 512 to be used by the Solaris installer. WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED! Is this OK [y,n,?,q] y <cr> The Solaris installer will use disk partition, /dev/dsk/c0t0d0s1. After files are copied, the system will automatically reboot, and installation will continue. <====== Please Wait... Copying mini-root to local disk. Copying platform specific files....done.   Java JumpStart 2.1 Fall 1998 Ultra 80 Workstation Ultra 60 Workstation Ultra 10 Workstation Ultra 5 Workstation Sun Enterprise 420R Server Sun Enterprise 220R Server Previously Published As 20576 Change History Java JumpStart 2.1 Fall 1998 is an invalid product entry because it does not show up in the swordfish database. It must be amended or deleted before we can publish. Here's the swordfish link http://krep.emea.sun.com/stats/swordfish/ Date: 2006-01-18 User Name: 95826 Action: Update Canceled Comment: *** Restored Published Content *** SSH AUDIT Version: 0 Date: 2006-01-18 User Name: 95826 Action: Update Started Comment: SSH AUDIT Version: 0 Attachments This solution has no attachment |
||||||||||||
|