Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1003646.1 : Connecting your console to a Sun Fire[TM]/Netra[TM] 1280 serial LOM port
PreviouslyPublishedAs 205148 Description This document gives the part numbers of the adapters needed to properly attach a console to the RJ45 Sunfire 1280/2900 serial LOM port. Steps to Follow Steps to Follow 1. Connect the RJ45-to-RJ45 straight-thru network cable (supplied with the server) to the Serial A/LOM port on the back panel of the 1280/2900 server. This port will be labeled "SSC1 Serial A". 2. Connect the other end of the network cable to the RJ45 connector on the silver-colored DB25/RJ45 adapter (part number 530-2889-0x) supplied with the server. If your console has a DB25 connector, use part number 530-3100. Sunfire/Netra 1280 Serial Port Pin-outs ======================================= 8-Pos RJ45 25-pin DSUB ------------------------- Pin 1 RTS ========> Pin 5 CTS Pin 2 DTR ========> Pin 6 DTR Pin 3 TXD ========> Pin 3 RXD Pin 4 REF ========> Pin 7 GND Pin 5 REF ========> Pin 7 GND Pin 6 RXD ========> Pin 2 TXD Pin 7 DSR ========> Pin 20 DTR Pin 8 CTS ========> Pin 4 RTS Product Sun Fire E2900 Server Sun Fire V1280 Server Netra 1280 Server Internal Comments This Technical Instruction applies to most Sun[TM] servers that have an RJ45 serial port, ie, rsc card on Sunfire[TM] 280/480/880, Netra T servers. lom, sc, console, serial Previously Published As 80886 Attachments This solution has no attachment |
||||||||||||
|