a) Show faults in FMA

# fmadm faulty

NOTE: Do not use 'fmadm faulty -a' in this step. When you specify the -a option
all resource information cached by the Fault Manager is listed, including 
faults, which have already been corrected or where no recovery action is needed
(see 'fmadm' man page). The listing also include information for resources,
that may no longer be present in the system

b)  For each fault UUID listed in the 'fmadm faulty' run

# fmadm repair <uuid>
# fmadm faulty     (to make sure the output is clean after repair)

c) Clear ereports and resource cache

# cd /var/fm/fmd
# rm e* f* c*/eft/* r*/*

d)  Reset the fmd serd modules

# fmadm reset cpumem-diagnosis
# fmadm reset cpumem-retire
# fmadm reset eft
# fmadm reset io-retire

e) Reboot the system

a) Stop the fmd:

# svcadm disable -s svc:/system/fmd:default

b) Remove all files from the FMA log directories. This is very specific to the files found in the FMS directories, all directories must be left intact.

# cd /var/fm/fmd

# find /var/fm/fmd -type f -exec ls {} \;

c) Check that only files within the /var/fm/fmd directory are identified then replace the ls with rm to remove them.

# find /var/fm/fmd -type f -exec rm {} \;

d) Restart fmd after the files are removed

# svcadm enable svc:/system/fmd:default