Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1007676.1 : Sun Fire[TM] 280R picld detects a disk fault if Solaris[TM] boots from an external boot disk
PreviouslyPublishedAs 210633 Description If Solaris[TM] boots from an external boot disk, the following error message may be logged on console or /var/adm/messages: Dec 21 15:26:57 stlab152 picld[59]: [ID 961923 daemon.error] WARNING: Device DISK0 failure detected by sensor DISK0_FAULT_SENSOR Dec 21 15:26:57 stlab152 picld[59]: [ID 961923 daemon.error] WARNING: Device DISK1 failure detected by sensor DISK1_FAULT_SENSOR Dec 21 15:32:27 stlab152 picld[59]: [ID 449286 daemon.error] Device DISK0 OK Dec 21 15:32:27 stlab152 picld[59]: [ID 449286 daemon.error] Device DISK1 OK Steps to Follow The above message is usually logged when you change run levels from single user mode to multi user mode. This is not an actual disk error and can be ignored because it just shows that the internal drives have not completely spun up yet. Product Sun Fire 280R Server picld, littleneck, DISK0_FAULT_SENSOR, DISK1_FAULT_SENSOR, SF280R Previously Published As 79731 Change History Date: 2004-12-23 User Name: 36642 Action: Approved Comment: put the right information in the description part of the document updated trademarks and spelled out acronyms as is required publishing. Version: 3 Date: 2004-12-22 User Name: 36642 Action: Accept Comment: Version: 0 Date: 2004-12-22 User Name: 82799 Action: Approved Comment: Made a few minor changes to the wording for clarity sake. Attachments This solution has no attachment |
||||||||||||
|