Sun Fire[TM] V1280/E2900 & Netra[TM] 1280 Internal Disk Replacement

Asset ID:	1-71-1012018.1
Update Date:	2010-07-06
Keywords:

Solution Type Technical Instruction Sure

Solution 1012018.1 : Sun Fire[TM] V1280/E2900 & Netra[TM] 1280 Internal Disk Replacement

Related Items


Sun Netra 1280 Server
 Sun Fire V1280 Server
 Sun Fire E2900 Server

Related Categories


GCS>Sun Microsystems>Servers>Midrange V and Netra Servers
 GCS>Sun Microsystems>Servers>Entry-Level Servers
 GCS>Sun Microsystems>Servers>Midrange Servers

PreviouslyPublishedAs
216470

Description
The following is the procedure to remove internal disks in the Sun Fire[TM] V1280/E2900 & Netra[TM] 1280. It is not recommended to remove a disk if the power LED is on and the ok_to_remove LED is not ON.

Steps to Follow
When identifying a disk for replacement in a V1280/E2900 & Netra[TM] 1280, the disk target to physical slot locations are as follows:

  target 0 (cXt0dY) = the disk in the lower physical slot
  target 1 (cXt1dY) = the disk in the upper physical slot

  X = controller number
  Y = disk number

Once disk is identified, you need to detach/unmount/unconfigure your disk/filesystems through the software you are using (for example, Solstice DiskSuite[TM]), otherwise you risk damaging them. The ok_to_remove LED should be lit, when the disk is unconfigured using cfgadm. Also, keep in mind that the power/active LED goes on when the disk is mounted, but only goes off if the power is removed in the IB_SSC. There are no individual switches in the power feeds to either of the disks.

The following is an example of how it should appear:
In this case we will remove disk1 (target 1),

# cfgadm -a
Ap_Id                    Type       Receptacle   Occupant    Condition
N0.IB6                 PCI_I/O_Boa  connected    configured   ok
N0.IB6::pci0           io           connected    configured   ok
N0.IB6::pci            io           connected    configured   ok
N0.IB6::pci2           io           connected    configured   ok
N0.IB6::pci3           io           connected    configured   ok
N0.SB0                 CPU_Board_(  connected    configured   ok
N0.SB0::cpu0           cpu          connected    configured   ok
N0.SB0::cpu1           cpu          connected    configured   ok
N0.SB0::cpu2           cpu          connected    configured   ok
N0.SB0::cpu3           cpu          connected    configured   ok
N0.SB0::memory         memory       connected    configured   ok
N0.SB2                 CPU_Board_(  connected    configured   ok
N0.SB2::cpu0           cpu          connected    configured   ok
N0.SB2::cpu1           cpu          connected    configured   ok
N0.SB2::cpu2           cpu          connected    configured   ok
N0.SB2::cpu3           cpu          connected    configured   ok
N0.SB2::memory         memory       connected    configured   ok
N0.SB4                 unknown      empty        unconfigured unknown
c1                     scsi-bus     connected    configured   unknown
c1::dsk/c1t0d0         disk         connected    configured   unknown
c1::dsk/c1t1d0         disk         connected    configured   unknown
c2                     scsi-bus     connected    unconfigured unknown

Note above that c1t1d0 is connected and configured.
Now check to see what is mounted on that drive.
Unmount anything mounted on that drive next.

# mount 
/ on /dev/dsk/c1t0d0s0 read/write/setuid/intr/largefiles/xattr/onerror=panic/dev=800000 on Thu Aug
14 14:11:59 2003
/proc on /proc read/write/setuid/dev=41c0000 on Thu Aug 14 14:11:58 2003
/etc/mnttab on mnttab read/write/setuid/dev=4280000 on Thu Aug 14 14:11:58
2003
/dev/fd on fd read/write/setuid/dev=42c0000 on Thu Aug 14 14:11:59 2003
/var/run on swap read/write/setuid/xattr/dev=1 on Thu Aug 14 14:12:00 2003
/tmp on swap read/write/setuid/xattr/dev=2 on Thu Aug 14 14:12:02 2003
/export/home on /dev/dsk/c1t0d0s7 read/write/setuid/intr/largefiles/xattr/onerror=panic/dev=800007 on Thu Aug
14 14:12:02 2003

# cfgadm -c unconfigure c1::dsk/c1t1d0
Aug 14 15:39:46 Lightweight genunix: /ssm@0,0/pci@18,600000/scsi@2/sd@1,0
(sd1) offline
# cfgadm -a
Ap_Id                   Type         Receptacle   Occupant    Condition
N0.IB6                  PCI_I/O_Boa  connected    configured   ok
N0.IB6::pci0            io           connected    configured   ok
N0.IB6::pci1            io           connected    configured   ok
N0.IB6::pci2            io           connected    configured   ok
N0.IB6::pci3            io           connected    configured   ok
N0.SB0                  CPU_Board_(  connected    configured   ok
N0.SB0::cpu0            cpu          connected    configured   ok
N0.SB0::cpu1            cpu          connected    configured   ok
N0.SB0::cpu2            cpu          connected    configured   ok
N0.SB0::cpu3            cpu          connected    configured   ok
N0.SB0::memory          memory       connected    configured   ok
N0.SB2                  CPU_Board_(  connected    configured   ok
N0.SB2::cpu0            cpu          connected    configured   ok
N0.SB2::cpu1            cpu          connected    configured   ok
N0.SB2::cpu2            cpu          connected    configured   ok
N0.SB2::cpu3            cpu          connected    configured   ok
N0.SB2::memory          memory       connected    configured   ok
N0.SB4                  unknown      empty        unconfigured unknown
c1                      scsi-bus     connected    configured   unknown
c1::dsk/c1t0d0          disk         connected    configured   unknown
c1::dsk/c1t1d0          disk         connected    unconfigured unknown
c2                      scsi-bus     connected    unconfigured unknown
#

Note above that c1t1d0 is now unconfigured. At this point the yellow light is on the 'ok-to-remove` LED. Now you can remove the disk.
Put the new drive in, the yellow LED will still be lit beside the drive.
Next, configure the new disk.

# cfgadm -c configure c1::dsk/c1t1d0

Check to see that it is configured.

# cfgadm -a
Ap_Id                   Type         Receptacle   Occupant    Condition
N0.IB6                  PCI_I/O_Boa  connected    configured   ok
N0.IB6::pci0            io           connected    configured   ok
N0.IB6::pci1            io           connected    configured   ok
N0.IB6::pci2            io           connected    configured   ok
N0.IB6::pci3            io           connected    configured   ok
N0.SB0                  CPU_Board_(  connected    configured   ok
N0.SB0::cpu0            cpu          connected    configured   ok
N0.SB0::cpu1            cpu          connected    configured   ok
N0.SB0::cpu2            cpu          connected    configured   ok
N0.SB0::cpu3            cpu          connected    configured   ok
N0.SB0::memory          memory       connected    configured   ok
N0.SB2                  CPU_Board_(  connected    configured   ok
N0.SB2::cpu0            cpu          connected    configured   ok
N0.SB2::cpu1            cpu          connected    configured   ok
N0.SB2::cpu2            cpu          connected    configured   ok
N0.SB2::cpu3            cpu          connected    configured   ok
N0.SB2::memory          memory       connected    configured   ok
N0.SB4                  unknown      empty        unconfigured unknown
c1                      scsi-bus     connected    configured   unknown
c1::dsk/c1t0d0          disk         connected    configured   unknown
c1::dsk/c1t1d0          disk         connected    configured   unknown
c2                      scsi-bus     connected    unconfigured unknown
# format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
      0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
         /ssm@0,0/pci@18,600000/scsi@2/sd@0,0
      1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
         /ssm@0,0/pci@18,600000/scsi@2/sd@1,0

The disk is now available for use and can be configured as needed using disk management software (for example, Solstice DiskSuite[TM]).

Product
Sun Fire V1280 Server
Sun Fire E2900 Server
Netra 1280 Server

Internal Comments
Audited/updated 11/25/09 - roberto.morandi@Sun.COM, Mid-Range Server Content Team

V1280, E2900, Netra 1280, LW8, disk replace
Previously Published As
71423

Change History
Date: 2007-02-21
User Name: 7058
Action: Approved
Comment: Normally I would insist on a tech review of the changes but since they were minor, I will go ahead and publilsh.
Version: 13

Attachments

This solution has no attachment