Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1012388.1 : Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference
PreviouslyPublishedAs 217087 Description Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference This is a quick reference for the syntax of LOM commands only. These commands are executed at the lom prompt on the system controller, not in Solaris. For more information on each command please see the Sun Fire Entry-Level Midrange System Controller Command Reference Manual Steps to Follow Commands: bootmode - Configure the way Solaris boots at the next reboot. bootmode normal break - Send a break signal to the Solaris console.
console - Connect to the Solaris/OpenBoot PROM console.
disablecomponent - Add a component to the blacklist.
enablecomponent - Remove a component from the blacklist.
flashupdate - Update the flash PROMs in the System Controller, all the system boards, or a specified board number.
help - Without arguments, list all available LOM commands. When an argument is supplied, display basic usage of the specified command and a short description.
history - Display the command history along with date and time stamps.
inventory - Display SEPROM contents of a FRU.
logout - Log out from this connection.
password - Set the password for the LOM.
poweroff - Forcibly power off the whole system to standby, or a FRU, or a list of FRUs.
poweron - Power on the entire system, or a FRU, or a list of FRUs.
reset Reset the Solaris system .
resetsc - Reset the System Controller.
setalarm - Set the system alarm relays and associated LEDS.
setdate - Set the date and time for the system.
setescape - Set the sequence of characters used to switch from the Solaris or OpenBoot PROM console to the LOM prompt.
seteventreporting - The seteventreporting command controls which messages are printed at the LOM prompt and the level of logged messages sent to Solaris.
setlocator - Set the state of the system Locator LED.
setupnetwork - Set up System Controller network attributes.
setupsc - Configure optional System Controller features.
showalarm - Display state of system alarm relays and LEDs.
showboards - Display the status for all boards in the system
showcomponent - Display a component or a list of components.
showdate - Display the current date and time for the system.
showenvironment - Display the current environmental status, temperatures, voltages, fan status, and so on, for the system..
showescape - Display the current escape sequence.
showeventreporting - Display the settings applied to the LOM software event reporting and messages.
showfault - Display the state of the system Fault LED.
showhostname - Display the system hostname.
showlocator - Display the state of the system Locator LED.
showlogs - Display the message event log.
For systems configured with enhanced-memory SCs (SC V2s), the following command shows the system error contents maintained in the persistent buffer.
showmodel - Display the platform model.
shownetwork - Display System Controller (LOM) network settings and MAC addresses.
showresetstate - Display the CPU registers
after an abnormal Solaris reset.
showsc - Display version and uptime information about the System Controller.
shutdown - Shut down Solaris and enter standby mode.
testboard - Test the specified CPU/Memory board.
Product Sun Fire V1280 Server Sun Fire E2900 Server Netra 1280 Server Netra 1290 Server lw8, commands, help, lom>, lom, showboards, showlogs, sc Previously Published As 80892 Change History Date: 2009-12-4 User Name: Josh Freeman Action: Updated Comment: Needed updated link to the command reference manual and needed netra 1280/1290 added too. Per ESG Content Team. Date: 2006-03-03 User Name: 25440 Action: Approved Comment: Publishing. Attachments This solution has no attachment |
||||||||||||
|