Asset ID:	1-71-1012485.1
Update Date:	2009-09-17
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1012485.1 :   Resetting Sun Blade [TM] 2500 (silver) Power Supply  


PreviouslyPublishedAs
217202

Description
How to reset Power Supply after an extended power failure

Steps to Follow

Under normal operating conditions, when power to the PSU (Power Supply Unit) is briefly interrupted, and then restored, the workstation will automatically power-on (and the Power button will not need to be depressed).
However, if the power failure or interruption is lengthy, your workstation may fail to automatically power-on.  If this is the case, follow this procedure:
1. Disconnect the workstation powercord from the AC outlet for approximately one minute.
2. Reconnect the powercord.
In a few seconds, your workstation should automatically power on.

Product
Sun Blade 2500 Workstation

SB2500, Silver, Power failure. Power Supply, PSU
Previously Published As
83645

Change History
Date: 2006-01-30
User Name: 31620
Action: Approved
Comment: Verified Metadata - ok
Verified Keywords - ok
Verified still correct for audience - currently set to contract
Audience left at contract as per FvF http://kmo.central/howto/FvF.html
Checked review date - currently set to 2007-01-25
Checked for TM - changed title from SB2500 to Sun Blade [TM] 2500
Publishing under the current publication rules of 18 Apr 2005:
Version: 3
Date: 2006-01-25
User Name: 31620
Action: Accept
Comment:
Version: 0
Date: 2006-01-25
User Name: 29970
Action: Approved
Comment: Good doc.
Version: 0
Date: 2006-01-25
User Name: 28241
Action: Approved
Comment: Tom Mortion please Tech Review.Please see Product Notes for SB2500 silver.
Thanks
Version: 0
Date: 2006-01-25
User Name: 28241
Action: Created
Comment:
Version: 0
Product_uuid
5d658be6-11f4-11d7-976d-c7b5989377a7|Sun Blade 2500 Workstation

Attachments

This solution has no attachment