Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1018698.1
Update Date:2009-11-23
Keywords:

Solution Type  Technical Instruction Sure

Solution  1018698.1 :   Sun StorEdge[TM] 6320/6920 Service Processor USB flash disk LED is red  


Related Items
  • Sun Storage 6320 System
  •  
  • Sun Storage 6920 System
  •  
Related Categories
  • GCS>Sun Microsystems>Storage - Disk>Modular Disk - 6xxx Arrays
  •  

PreviouslyPublishedAs
230404


Description
This document explains the significance of a steady red LED of the Sun StorEdge [TM] 6320/6920 Service Processor USB flash disk.


Steps to Follow
The Sun StorEdge[TM] 6320/6920 Service Processor (SP) has a flash disk connected to its USB port. This flash disk is used to save the personality files of the SP, so that they can be restored if the SP has to be replaced or reinstalled.

The Sun StorEdge 6920 system  Getting Started Guide , Chapter  , "Installing the System" and Section, "Installing the USB Flash Disk", mentions:

"To verify that the flash disk is installed correctly, look for a steady green LED light located at the top of the disk".

The Sun StorEdge 6320 system 1.2 Installation Guide, Appendix F,  Installing the USB Flash Disk , mentions:

 If your flash disk has an LED green light, it displays when the flash disk connects correctly .

Though the above is true, the following needs to be understood too.

There is a cron job (/opt/SUNWsefbru/bin/fbr) that runs every 5 minutes on  the SP of the StorEdge[TM] 6920 and every 2 minutes on the SP of the StorEdge[TM]  6320,

which saves the personality information into the flash drive. The script first checks if  the flash drive is mounted and if it is not, will mount it.

The USB flash disk LED will remain a steady red while the drive is mounted. Hence the SP flash disk LED might turn red immediately after installing and might not be green as mentioned in the  Getting Started Guide .

In summary, the flash disk LED turning red does not indicate any problem. It only indicates that the USB drive has been mounted.



Product
Sun StorageTek 6920 System
Sun StorageTek 6320 System

Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the “Document Feedback” alias(es) listed below:

storage-os-disk-mid-domain@sun.com
The Knowledge Work Queue for this article is KNO-STO-MIDRANGE_DISK.

USB Flash Disk, LED, red, Sun StorEdge[TM] 6320/6920, mount, installation, audited
Previously Published As
82294

Change History
Date: 2007-08-21
User Name: 7058
Action: Approved
Comment: OK to publish. Added normalized keyword.
Version: 5
Date: 2007-08-21
User Name: 88109
Action: Approved
Comment: added keyword
Version: 0
Date: 2007-08-21
User Name: 88109
Action: Update Started
Comment: adding normalized keyword for 6920 normalization
Version: 0
Date: 2006-11-07

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback