| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
| Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | ||
|
|
||
 |
||||||||||||
Solution Type Technical Instruction Sure Solution 1019307.1 : How to verify proper cabling on a Sun Blade[TM] 6000 and Sun Blade[TM] 6048 Modular System
PreviouslyPublishedAs 238385 Description This document describes how to to check the cabling and attach those cables to a Blade 6000 and a Blade 6048 chassis. Symptoms:
This document describes how to to check the cabling and attach those cables to a Blade 6000 and a Blade 6048 chassis, and also advice about cabling into the individual blade servers Steps to Follow Steps to follow to verify cabling Before you begin... Be sure to check that with your order, you received the following items: Cable kit order number X4621A, which contains
If the above items did not
ship with your order, please contact your point of sale to obtain
such.
Please refer to
the Sun
Blade 6000 Modular System Getting Started Guide
in the Sun
Blade 6000 Modular System Documentation collection for details on
how the ports are labeled on each. Plug a serial
console cable into the RJ-45 SER MGT port on the rear panel of the
CMM. Make sure you do not plug the serial cable into the NET MGT
port The Sun Blade 6000 chassis provides up to two NEM slots per server module labeled NEM 0-1 with 0 being the bottom NEM slot and 1 being the top NEM slot.Each Ethernet NEM provides 10 individual Gigabit Ethernet NICs -- one for each server module labeled NET 0 to NET 9 right-to-left as viewed from the back of the chassis. Refer to the Sun
Blade 6000 Modular Installation Guide
in the Sun
Blade 6000 Modular System Documentation collection In a fully populated chassis, there are 20 PCI EMs with two data network ports available on each PCI EM (providing a total of 40 data ports). The Sun Blade 6000 chassis provides 20 PCI EM slots, with two PCI EM slots assigned to each server module. The PCI EM slots are numbered PCI EM 0.0 to 9.1 right-to-left as viewed from the rear of the chassis. Refer to the Sun
Blade 6000 Modular Installation Guide
in the Sun
Blade 6000 Modular System Documentation collection As well as being able connect to each blade server via the CMM, there is an option to connect directly into each individual blade's service processor (SP) via a dongle cable. This gives another blade connectivity option, should you not be able to access via the CMM Details on how to attach and connect via the dongle cables are in the blade installation manuals: Sun
Blade T6300 Server Module Installation Guide
Locate the four power cables
shipped with the system. NOTE: Main power is automatically distributed to the system chassis. Refer to the Sun Blade 6000 Modular Installation Guide in the Sun Blade 6000 Modular System Documentation collection
Product Sun Blade 6000 Modular System Sun Blade 6048 Modular System Sun Blade X6220 Server Module Sun Blade X6250 Server Module Sun Blade X6450 Server Module Sun Blade T6300 Server Module Sun Blade T6320 Server Module Internal Comments This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the “Document Feedback” alias(es) listed below: Domain Lead: Dencho.Kojucharov@sun.com Feedback Alias: blade_normalizers@sun.com normalized, 6000, blade, 6048, verify, cable, cabling, dongle, X6220, X6250, T6300, T6320 Attachments This solution has no attachment |
||||||||||||
|
||||||||||||