Asset ID:	1-71-1298838.1
Update Date:	2011-03-07
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1298838.1 :   How to Replace a SPARC T3-1 Hard Drive:ATR:2542:0  

In this Document
  Goal
  Solution

---

Applies to:

SPARC T3-1 - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

Hard Drive Replacement

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
CRU procedure.

DELIVERY REQUIREMENT:
Immediate

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

Note – This is a hot service procedure that can be performed by customers while the server is running. The drive must be taken offline before it is removed. If it cannot be taken offline, the OS must be shut down to prevent running programs from attempting to use it.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

* Determine if you need to shut down the OS to replace the drive, and perform one of the following actions:

1. If the drive cannot be taken offline without shutting down the OS, you'll have to power down the system before take the drive offline.
2. If the drive can be taken offline without shutting down the OS,take the drive offline following this procedures:
- At the Oracle Solaris prompt, type the cfgadm -al command to list all drives in the device tree, including drives that are not configured:
- Select the drive that you want to remove. Unconfigure the drive using the cfgadm -c unconfigure command.
- Verify that the drive’s blue Ready-to-Remove LED is lit.

* Press the drive release button to unlock the drive and pull on the latch to remove the drive.
* Install the replacement drive or a filler tray.
* With the latch open on the replacement drive, align insert the drive into the drive bay and slide it forward until it is seated.
* Close the latch to lock the drive in place.
* Bring the drive online.
* Configure the drive using the cfgadm -c configure command.
* Verify the drive.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE INFORMATION: SPARC T3-1 Service Manual, p/n E21416-xx

Attachments

This solution has no attachment