Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1306184.1 : How to Remove and Replace a V480/V490 AC Power Cord:ATR:987:0
In this Document
Applies to:Sun Fire V480 Server - Version: Not ApplicableSun Fire V490 Server - Version: Not Applicable and later [Release: N/A and later] Information in this document applies to any platform. GoalHow to Remove and Replace a V480/V490 AC Power CordSolution*DISPATCH INSTRUCTIONSWHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?) Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner. DELIVERY REQUIREMENT: Schedule FE with maintenance window within contractual terms. *FIELD ENGINEER INSTRUCTIONS PROBLEM OVERVIEW: Power Cord failed. WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? : A data backup is not a pre-requisite but is a wise precaution. The customer is not required to perform a system shutdown. WHAT ACTION DOES THE ENGINEER NEED TO TAKE: The Sun Fire V480/V490 server has dual redundant power supplies each with its own power cord. You can swap one power cord while the other one is still running. For a single power source configuration, the system should be already powered down before replace the bad power cord. OBTAIN CUSTOMER ACCEPTANCE WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work. If the replacement was in a system with a single power source, restart software applications per applicable administration guides to resume system operation. PARTS NOTE: Refer to the System Handbook for the country specific type of power cord. REFERENCE INFORMATION: Service Manual V480 "Servicing Cables" (pages 151 -168) Service Manual V490 "Servicing Cables" (pages 165 - 186) Attachments This solution has no attachment |
||||||||||||
|