Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1309209.1
Update Date:2011-04-12
Keywords:

Solution Type  Technical Instruction Sure

Solution  1309209.1 :   How to Replace the Sun Blade X6250 Hard Disk Drive:ATR:2618:0  


Related Items
  • Sun Blade X6250 Server Module
  •  
Related Categories
  • GCS>Sun Microsystems>CAP VCAP
  •  




In this Document
  Goal
  Solution


Applies to:

Sun Blade X6250 Server Module - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to Replace the Sun Blade X6250 Hard Disk Drive.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
HDs are hot-swappable CRUs that can be replaced by anyone.

DELIVERY REQUIREMENT:
Schedule with maintenance window

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

System must be shut down

Important: Do not operate the system with empty slots. Always insert a filler into an empty slot to reduce the possibility of module shutdown.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1.- Observe the LEDs on the faces of the HDs and identify the defective HD:

* Middle LED on (amber): The disk is faulty and should be replaced.
* Left LED on (green): The disk is operating properly.
* Right LED on (blue): This indicates that the disk is ready to remove. This can be useful if you are replacing a disk that hasn’t failed.

2.- Press the button on the face of the HD to release the spring-loaded securing latch.

3.- Grasp the securing latch and remove the HD from the disk bay.

4.- Installation is the reverse of this procedure.

Note: When you install an HD, open its securing latch before you push the disk into the bay. Push the HD into the bay until it stops, then close the securing latch to fully engage the connector on the HD backplane.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Post work required to bring the system back online

PARTS NOTE:
Parts not needed

REFERENCE INFORMATION:
http://download.oracle.com/docs/cd/E19045-01/

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback