Asset ID:	1-71-1317332.1
Update Date:	2011-04-28
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1317332.1 :   How to Remove and Replace X6440 REM Battery:ATR:2301:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun Blade X6440 Server Module - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

X6440 REM Battery Replacement

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
X6440 trained

DELIVERY REQUIREMENT:
schedule with maintenance window

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

* The server must be fully shut down and the power cords disconnected.
* Do not operate the system with empty slots. Always insert a filler panel into an empty slot to reduce the possibility of system shut down.
* Take ESD Precautions.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Power off the server and remove the server module from the chassis

2. Remove the main cover

3. Remove the two screws that secure the REM battery to the battery standoff connectors.

4. Lift the battery away from the standoff connectors while simultaneously pulling the battery from its slot.

5. Disconnect the battery cable from the chassis motherboard.

Installation is the reverse of these procedures.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify functionality, no service LEDs or messages

PARTS NOTE:

REFERENCE INFORMATION:
Sun Blade X6440 Server Module Service Manual
http://download.oracle.com/docs/cd/E19045-01/blade.x6440/index.html

Attachments

This solution has no attachment